15 C.F.R. § Supplement No. 6 to Part 774
Note to Supplement No. 6: While the items on this list are identified by ECCN rather than by Wassenaar Arrangement numbering, the item descriptions are drawn directly from the Wassenaar Arrangement's Sensitive List. If text accompanies an ECCN below, then the Sensitive List is limited to a subset of items classified under the specific ECCN or has differing parameters.
(1) Category 1
(i) 1A002.a.1-"Composite" structures or laminates made from an organic "matrix" and "fibrous or filamentary materials" specified by 1C010.c or 1C010.d.
(ii) 1C001.
(iii) 1C007.c.
(iv) 1C010.c and .d.
(v) 1C012.
(vi) 1D002-"Software" for the "development" of organic "matrix", metal "matrix", or carbon "matrix" laminates or composites controlled under 1A002.a.1, 1C001, 1C007.c, 1C010.c, 1C010.d, or 1C012.
(vii) 1E001-"Technology" according to the General Technology Note for the "development" or "production" of equipment and materials controlled under 1A002, 1C001, 1C007.c, 1C010.c, 1C010.d, or 1C012.
(viii) 1E002.e and .f.
(2) Category 2
(i) 2D001-"Software", other than that controlled by 2D002, "specially designed" for the "development" or "production" of equipment as follows:
(A) Specified by 2B001.a, 2B001.b.1, or 2B001.b.2, and having a "unidirectional positioning repeatability" equal to or less (better) than 0.9 [MICRO]m along one or more linear axis;
(B) Specified by 2B001.b.3, 2B001.d, 2B001.f or 2B003.
(ii) 2E001-"Technology" according to the General Technology Note for the "development" of equipment or "software", as follows:
(A) Equipment specified by 2B001.a, 2B001.b.1 or 2B001.b.2, and having a "unidirectional positioning repeatability" equal to or less (better) than 0.9 [MICRO]m along one or more linear axis;
(B) Equipment specified by 2B001.b.3, 2B001.d, 2B001.f or 2B003.
(C) "Software" specified by 2D001 of this Supplement;
(iii) 2E002-"Technology" according to the General Technology Note for the "production" of equipment as follows:
(A) Specified by 2B001.a, 2B001.b.1, or 2B001.b.2, and having a "unidirectional positioning repeatability" equal to or less (better) than 0.9 [MICRO]m along one or more linear axis;
(B) Specified by 2B001.b.3, 2B001.d, 2B001.f or 2B003.
(3) Category 3
(i) 3A001.b.2 (including those described under 3A001.b.2 that are controlled by 3A001.z)-"Monolithic Microwave Integrated Circuit" ("MMIC") amplifiers that are any of the following:
(A) Rated for operation at frequencies exceeding 2.7 GHz up to and including 6.8 GHz with a "fractional bandwidth" greater than 15%, and having any of the following:
(A.1.) A peak saturated power output greater than 300 W (54.8 dBm) at any frequency exceeding 2.7 GHz up to and including 2.9 GHz;
(A.2.) A peak saturated power output greater than 300 W (54.8 dBm) at any frequency exceeding 2.9 GHz up to and including 3.2 GHz;
(A.3.) A peak saturated power output greater than 300 W (54.8 dBm) at any frequency exceeding 3.2 GHz up to and including 3.7 GHz; or
(A.4.) A peak saturated power output greater than 120 W (50.8 dBm) at any frequency exceeding 3.7 GHz up to and including 6.8 GHz;
(B) Rated for operation at frequencies exceeding 6.8 GHz up to and including 12 GHz with a "fractional bandwidth" greater than 10%, and having any of the following:
(B.1) A peak saturated power output greater than 25 W (44 dBm) at any frequency exceeding 6.8 GHz up to and including 8.5 GHz; or
(B.2.) A peak saturated power output greater than 25 W (44 dBm) at any frequency exceeding 8.5 GHz up to and including 12 GHz.
(ii) 3A001.b.3 (including those described under 3A001.b.3 that are controlled by 3A001.z)-Discrete microwave transistors that are any of the following:
(A) Rated for operation at frequencies exceeding 2.7 GHz up to and including 6.8 GHz and having any of the following:
(A.1.) A peak saturated power output greater than 600 W (57.8 dBm) at any frequency exceeding 2.7 GHz up to and including 2.9 GHz;
(A.2.) A peak saturated power output greater than 600 W (57.8 dBm) at any frequency exceeding 2.9 GHz up to and including 3.2 GHz;
(A.3.) A peak saturated power output greater than 600 W (57.8 dBm) at any frequency exceeding 3.2 GHz up to and including 3.7 GHz; or
(A.4.) A peak saturated power output greater than 130 W (51.2 dBm) at any frequency exceeding 3.7 GHz up to and including 6.8 GHz;
(B) Rated for operation at frequencies exceeding 6.8 GHz up to and including 12 GHz and having any of the following:
(B.1.) A peak saturated power output greater than 130 W (51.2 dBm) at any frequency exceeding 6.8 GHz up to and including 8.5 GHz;
(B.2.) A peak saturated power output greater than 60 W (47.8 dBm) at any frequency exceeding 8.5 GHz up to and including 12 GHz.
(iii) 3A002.g.1.
(iv) 3D001-"Software" "specially designed" for the "development" or "production" of equipment controlled under 3A001.b.2, 3A001.b.3, equipment described under 3A001.b.2 or 3A001.b.3 that are controlled under 3A001.z, and 3A002.g.1.
(v) 3E001-"Technology" according to the General Technology Note for the "development" or "production" of equipment controlled under 3A001.b.2, 3A001.b.3, equipment described under 3A001.b.2 or 3A001.b.3 that are controlled under 3A001.z, and 3A002.g.1.
(4) Category 4
(i) 4A001.a.2.
(ii) [Reserved]
(5) Category 5-Part 1
(i) 5A001.b.3, .b.5, and .h.
(ii) 5B001.a-Equipment and "specially designed" components or "accessories" therefor, "specially designed" for the "development" or "production" of equipment, functions or features controlled under 5A001.b.3, b.5, or .h.
(iii) 5D001.a-"Software" "specially designed" for the "development" or "production" of equipment, functions or features controlled under 5A001.b.3, b.5, or .h.
(iv) [Reserved]
(v) 5E001.a-"Technology" according to the General Technology Note for the "development" or "production" of equipment, functions or features controlled under 5A001.b.3, b.5, or .h or "software" described in this Supplement's description of 5D001.a.
(6) Category 6
(i) 6A001.a.1.b-Systems or transmitting and receiving arrays, designed for object detection or location, having any of the following:
(A) A transmitting frequency below 5 kHz or a sound pressure level exceeding 224 dB (reference 1 [MICRO]Pa at 1 m) for equipment with an operating frequency in the band from 5 kHz to 10 kHz inclusive;
(B) Sound pressure level exceeding 224 dB (reference 1 [MICRO]Pa at 1 m) for equipment with an operating frequency in the band from 10 kHz to 24 kHz inclusive;
(C) Sound pressure level exceeding 235 dB (reference 1 [MICRO]Pa at 1 m) for equipment with an operating frequency in the band between 24 kHz and 30 kHz;
(D) Forming beams of less than 1° on any axis and having an operating frequency of less than 100 kHz;
(E) Designed to operate with an unambiguous display range exceeding 5,120 m; or
(F) Designed to withstand pressure during normal operation at depths exceeding 1,000 m and having transducers with any of the following:
(1) Dynamic compensation for pressure; or
(2) Incorporating other than lead zirconate titanate as the transduction element;
(ii) 6A001.a.1.e.
(iii) 6A001.a.2.a.1, a.2.a.2, a.2.a.3, a.2.a.5, and a.2.a.6.
(iv) 6A001.a.2.b.
(v) 6A001.a.2.c-Processing equipment, "specially designed" for real time application with towed acoustic hydrophone arrays, having "user-accessible programmability" and time or frequency domain processing and correlation, including spectral analysis, digital filtering and beamforming using Fast Fourier or other transforms or processes.
(vi) 6A001.a.2.d.
(vii) 6A001.a.2.e.
(viii) 6A001.a.2.f-Processing equipment, "specially designed" for real time application with bottom or bay cable systems, having "user-accessible programmability" and time or frequency domain processing and correlation, including spectral analysis, digital filtering and beamforming using Fast Fourier or other transforms or processes.
(ix) 6A002.a.1.a, a.1.b, and a.1.c.
(x) 6A002.a.1.d.
(xi) 6A002.a.2.a-Image intensifier tubes having all of the following:
(A) A peak response in the wavelength range exceeding 400 nm but not exceeding 1,050 nm;
(B) Electron image amplification using any of the following:
(1) A microchannel plate for electron image amplification with a hole pitch (center-to-center spacing) of 12 [MICRO]m or less; or
(2) An electron sensing device with a non-binned pixel pitch of 500 [MICRO]m or less, "specially designed" or modified to achieve ' charge multiplication' other than by a microchannel plate; and
(C) Any of the following photocathodes:
(1) Multialkali photocathodes (e.g., S-20 and S-25) having a luminous sensitivity exceeding 700 [MICRO]A/lm;
(2) GaAs or GaInAs photocathodes; or
(3) Other "III-V compound" semiconductor photocathodes having a maximum "radiant sensitivity" exceeding 10 mA/W.
(xii) 6A002.a.2.b.
(xiii) 6A002.a.3-Subject to the following additional notes:
Note 1:6A002.a.3 does not apply to the following "focal plane arrays" in this Supplement:
a. Platinum Silicide (PtSi) "focal plane arrays" having less than 10,000 elements;
b. Iridium Silicide (IrSi) "focal plane arrays".
Note 2:6A002.a.3 does not apply to the following "focal plane arrays" in this Supplement:
a. Indium Antimonide (InSb) or Lead Selenide (PbSe) "focal plane arrays" having less than 256 elements;
b. Indium Arsenide (InAs) "focal plane arrays";
c. Lead Sulphide (PbS) "focal plane arrays";
d. Indium Gallium Arsenide (InGaAs) "focal plane arrays".
Note 3:6A002.a.3 does not apply to Mercury Cadmium Telluride (HgCdTe) "focal plane arrays" as follows in this Supplement:
a. 'Scanning Arrays' having any of the following:
1. 30 elements or less; or
2. Incorporating time delay-and-integration within the element and having 2 elements or less;
b. 'Staring Arrays' having less than 256 elements.
Technical Notes:a. 'Scanning Arrays' are defined as "focal plane arrays" designed for use with a scanning optical system that images a scene in a sequential manner to produce an image;
b. 'Staring Arrays' are defined as "focal plane arrays" designed for use with a nonscanning optical system that images a scene.
Note 6:6A002.a.3 does not apply to the following "focal plane arrays" in this List:
a. Gallium Arsenide (GaAs) or Gallium Aluminum Arsenide (GaAlAs) quantum well "focal plane arrays" having less than 256 elements;
b. Microbolometer "focal plane arrays" having less than 8,000 elements.
Note 7:6A002.a.3.g does not apply to "focal plane arrays", "specially designed" or modified to achieve 'charge multiplication', as follows:
a. Linear (1-dimensional) arrays having 4,096 elements or less.
b. Non-linear (2-dimensional) arrays having all of the following;
b.1. A total of 250,000 elements or less;and
b.2. A maximum of 4,096 elements in each dimension.
(xiv) 6A002.b.
(xv) 6A002.c-' Direct view' imaging equipment incorporating any of the following:
(A) Image intensifier tubes having the characteristics listed in this Supplement's description of 6A002.a.2.a or 6A002.a.2.b;
(B) "Focal plane arrays" having the characteristics listed in this Supplement's description of 6A002.a.3; or
(C) Solid-state detectors having the characteristics listed in 6A002.a.1.
(xvi) 6A003.b.3-Imaging cameras incorporating image intensifier tubes having the characteristics listed in this Supplement's description of 6A002.a.2.a or 6A002.a.2.b
Note: 6A003.b.3 does not apply to imaging cameras "specially designed" or modified for underwater use.
(xvii) 6A003.b.4-Imaging cameras incorporating "focal plane arrays" having any of the following:
(A) Incorporating "focal plane arrays" specified by this Supplement's description of 6A002.a.3.a to 6A002.a.3.e;
(B) Incorporating "focal plane arrays" specified by this Supplement's description of 6A002.a.3.f; or
(C) Incorporating "focal plane arrays" specified by this Supplement's description of 6A002.a.3.g.
Note 1: ' Imaging cameras' described in 6A003.b.4 include "focal plane arrays" combined with sufficient "signal processing" electronics, beyond the read out integrated circuit, to enable as a minimum the output of an analog or digital signal once power is supplied.
Note 2: 6A003.b.4.a does not control imaging cameras incorporating linear "focal plane arrays" with twelve 12 elements or fewer, not employing time-delay-and-integration within the element, and designed for any of the following:
a. Industrial or civilian intrusion alarm, traffic or industrial movement control or counting systems;
b. Industrial equipment used for inspection or monitoring of heat flows in buildings, equipment or industrial processes;
c. Industrial equipment used for inspection, sorting or analysis of the properties of materials;
d. Equipment "specially designed" for laboratory use; or
e. Medical equipment.
Note 3: 6A003.b.4.b does not control imaging cameras having any of the following characteristics:
a. A maximum frame rate equal to or less than 9 Hz;
b. Having all of the following:
1. Having a minimum horizontal or vertical ' Instantaneous-Field-of-View (IFOV)' of at least 10 mrad/pixel (milliradians/pixel);
2. Incorporating a fixed focal-length lens that is not designed to be removed;
3. Not incorporating a ' direct view' display; and
Technical Note: ' Direct view' refers to an imaging camera operating in the infrared spectrum that presents a visual image to a human observer using a near-to-eye micro display incorporating any light-security mechanism.
4. Having any of the following:
a. No facility to obtain a viewable image of the detected field-of-view; or
b. The camera is designed for a single kind of application and designed not to be user modified; or
Technical Note: ' Instantaneous Field of View (IFOV)' specified in Note 3.b is the lesser figure of the ' Horizontal FOV' or the ' Vertical FOV'.
' Horizontal IFOV' = horizontal Field of View (FOV)/number of horizontal detector elements
' Vertical IFOV'= vertical Field of View (FOV)/number of vertical detector elements.
c. Where the camera is "specially designed" for installation into a civilian passenger land vehicle of less than 3 tonnes three tons (gross vehicle weight) and having all of the following:
1. Is operable only when installed in any of the following:
a. The civilian passenger land vehicle for which it was intended; or
b. A "specially designed", authorized maintenance test facility; and
2. Incorporates an active mechanism that forces the camera not to function when it is removed from the vehicle for which it was intended.
Note: When necessary, details of the items will be provided, upon request, to the Bureau of Industry and Security in order to ascertain compliance with the conditions described in Note 3.b.4 and Note 3.c in this Note to 6A003.b.4.b.
Note 4: 6A003.b.4.c does not apply to ' imaging cameras' having any of the following characteristics:
a. Having all of the following:
1. Where the camera is "specially designed" for installation as an integrated component into indoor and wall-plug-operated systems or equipment, limited by design for a single kind of application, as follows:
a. Industrial process monitoring, quality control, or analysis of the properties of materials;
b. Laboratory equipment "specially designed" for scientific research;
c. Medical equipment;
d. Financial fraud detection equipment; and
2. Is only operable when installed in any of the following:
a. The system(s) or equipment for which it was intended; or
b. A "specially designed", authorized maintenance facility; and
3. Incorporates an active mechanism that forces the camera not to function when it is removed from the system(s) or equipment for which it was intended;
b. Where the camera is "specially designed" for installation into a civilian passenger land vehicle of less than 3 tonnes (gross vehicle weight), or passenger and vehicle ferries having a length overall (LOA) 65 m or greater, and having all of the following:
1. Is only operable when installed in any of the following:
a. The civilian passenger land vehicle or passenger and vehicle ferry for which it was intended; or
b. A "specially designed", authorized maintenance test facility; and
2. Incorporates an active mechanism that forces the camera not to function when it is removed from the vehicle for which it was intended;
c. Limited by design to have a maximum "radiant sensitivity" of 10 mA/W or less for wavelengths exceeding 760 nm, having all of the following:
1. Incorporating a response limiting mechanism designed not to be removed or modified; and
2. Incorporates an active mechanism that forces the camera not to function when the response limiting mechanism is removed; and
3. Not "specially designed" or modified for underwater use; or
d. Having all of the following:
1. Not incorporating a ' direct view' or electronic image display;
2. Has no facility to output a viewable image of the detected field of view;
3. The "focal plane array" is only operable when installed in the camera for which it was intended; and
4. The "focal plane array" incorporates an active mechanism that forces it to be permanently inoperable when removed from the camera for which it was intended.
Note: When necessary, details of the item will be provided, upon request, to the Bureau of Industry and Security in order to ascertain compliance with the conditions described in Note 4 above.
Note 5: 6A003.b.4.c does not apply to imaging cameras "specially designed" or modified for underwater use.
(xviii) 6A003.b.5.
(xix) 6A004.c.
(xx) 6A004.d.
(xxi) 6A006.a.1.
(xxii) 6A006.a.2-"Magnetometers" using optically pumped or nuclear precession (proton/Overhauser) "technology" having a ' sensitivity' lower (better) than 2 pT (rms) per square root Hz.
(xxiii) 6A006.c.1-"Magnetic gradiometers" using multiple "magnetometers" specified by 6A006.a.1 or this Supplement's description of 6A006.a.2.
(xxiv) 6A006.d-"Compensation systems" for the following:
(A) Magnetic sensors specified by 6A006.a.2 and using optically pumped or nuclear precession (proton/Overhauser) "technology" that will permit these sensors to realize a ' sensitivity' lower (better) than 2 pT rms per square root Hz.
(B) Underwater electric field sensors specified by 6A006.b.
(C) "Magnetic gradiometers" specified by 6A006.c. that will permit these sensors to realize a ' sensitivity' lower (better) than 3 pT/m rms per square root Hz.
(xxv) 6A006.e-Underwater electromagnetic receivers incorporating "magnetometers" specified by 6A006.a.1 or this Supplement's description of 6A006.a.2.
(xxvi) 6A008.d, .h, and .k.
(xxvii) 6B008.
(xxviii) 6D001-"Software" "specially designed" for the "development" or "production" of equipment specified by 6A004.c, 6A004.d, 6A008.d, 6A008.h, 6A008.k, or 6B008.
(xxix) 6D003.a.
(xxx) 6E001.
(xxxi) 6E002-"Technology" according to the General Technology Note for the "production" of equipment specified by the 6A or 6B provisions described in this Supplement.
(7) Category 7
(i) 7D002.
(ii) 7D003.a.
(iii) 7D003.b.
(iv) [Reserved]
(v) 7D004.a to .d and .g.
(vi) 7E001.
(vii) 7E002.
(8) Category 8
(i) 8A001.b to .c.
(ii) 8A002.b-Systems specially designed or modified for the automated control of the motion of submersible vehicles specified by 8A001.b through .c using navigation data having closed loop servo-controls and having any of the following:
(A) Enabling a vehicle to move within 10 m of a predetermined point in the water column;
(B) Maintaining the position of the vehicle within 10 m of a predetermined point in the water column; or
(C) Maintaining the position of the vehicle within 10 m while following a cable on or under the seabed.
(iii) 8A002.h and .j.
(iv) 8A002.o.3.
(v) 8A002.p.
(vi) 8D001-"Software" specially designed for the "development" or "production" of equipment in 8A001.b to .c, 8A002.b (as described in this Supplement), 8A002.h, 8A002.j, 8A002.o.3, or 8A002.p.
(vii) 8D002.
(viii) 8E001-"Technology" according to the General Technology Note for the "development" or "production" of equipment specified by 8A001.b to .c, 8A002.b (as described in this Supplement), 8A002.h, 8A002.j, 8A002.o.3, or 8A002.p.
(ix) 8E002.a.
(9) Category 9
(i) 9A011.
(ii) 9B001.
(iii) 9D001-"Software" "specially designed" or modified for the "development" of equipment or "technology," specified by 9A011, 9B001.b. 9E003.a.1, 9E003.a.2 to a.5 or 9E003.a.8 or 9E003.h.
(iv) 9D002-"Software" "specially designed" or modified for the "production" of equipment specified by 9A011 or 9B001.b.
(v) 9D004.a and .c.
(vi) 9E001.
(vii) 9E002.
(viii) [Reserved]
(ix) 9E003.a.1 to a.5, a.8.
(x) 9E003.h.
15 C.F.R. §Supplement No. 6 to Part 774