Section 145.103 - Housing and facilities requirements(a) Each certificated repair station must provide-(1) Housing for the facilities, equipment, materials, and personnel consistent with its ratings and limitations.(2) Facilities for properly performing the maintenance, preventive maintenance, or alterations of articles or the specialized service for which it is rated. Facilities must include the following:(i) Sufficient work space and areas for the proper segregation and protection of articles during all maintenance, preventive maintenance, or alterations.(ii) Segregated work areas enabling environmentally hazardous or sensitive operations such as painting, cleaning, welding, avionics work, electronic work, and machining to be done properly and in a manner that does not adversely affect other maintenance or alteration articles or activities;(iii) Suitable racks, hoists, trays, stands, and other segregation means for the storage and protection of all articles undergoing maintenance, preventive maintenance, or alterations, and;(iv) Space sufficient to segregate articles and materials stocked for installation from those articles undergoing maintenance, preventive maintenance, or alterations to the standards required by this part.(v) Ventilation, lighting, and control of temperature, humidity, and other climatic conditions sufficient to ensure personnel perform maintenance, preventive maintenance, or alterations to the standards required by this part.(b) A certificated repair station may perform maintenance, preventive maintenance, or alterations on articles outside of its housing if it provides suitable facilities that are acceptable to the FAA and meet the requirements of § 145.103(a) so that the work can be done in accordance with the requirements of part 43 of this chapter.Docket FAA-2016-8744, Amdt. 145-31, 81 FR 49163 , July 27, 2016 Docket FAA-2016-8744, Amdt. 145-31, 81 FR 49163, 7/27/2016