Current through November 30, 2024
Section 431.323 - Materials incorporated by reference(a) Certain material is incorporated by reference into this subpart with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51 . To enforce any edition other than that specified in this section, the U.S. Department of Energy (DOE) must publish a document in the FEDERAL REGISTER and the material must be available to the public. All approved incorporation by reference (IBR) material is available for inspection at DOE, and at the National Archives and Records Administration (NARA). Contact DOE at: the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, Sixth Floor, 950 L'Enfant Plaza SW, Washington, DC 20024, (202) 586-9127, Buildings@ee.doe.gov, https://www.energy.gov/eere/buildings/building-technologies-office. For information on the availability of this material at NARA, email: fr.inspection@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibr-locations.html. The material may be obtained from the sources in the following paragraphs of this section.(b)ANSI. American National Standards Institute, 25 W. 43rd Street, 4th Floor, New York, NY 10036; 212-642-4900; www.ansi.org.(1) ANSI C78.43-2017, American National Standard for Electric Lamps-Single-Ended Metal Halide Lamps, approved December 21, 2017; IBR approved for § 431.324 .(2) ANSI C78.44-2016, American National Standard for Electric Lamps-Double-Ended Metal Halide Lamps, approved July 1, 2016; IBR approved for § 431.324 .(3) ANSI C82.6-2015 (R2020), American National Standard for Lamp Ballasts-Ballasts for High-Intensity Discharge Lamps-Methods of Measurement, approved March 30, 2020; IBR approved for §§ 431.322 ; 431.324 .(4) ANSI C82.9-2016, American National Standard for Lamp Ballasts-High Intensity Discharge and Low-Pressure Sodium Lamps-Definitions, approved July 12, 2016; IBR approved for §§ 431.322 ; 431.324 .(c)IEC. International Electrotechnical Commission, 3 rue de Varembe, 1st Floor, P.O. Box 131, CH-1211 Geneva 20-Switzerland, +41 22 919 02 11, or go to webstore.iec.ch/home.(1) IEC 63103, Lighting Equipment-Non-active Mode Power Measurement, Edition 1.0, dated 2020-07; IBR approved for § 431.324 .(d)NFPA. National Fire Protection Association, 11 Tracy Drive, Avon, MA 02322, 1-800-344-3555, or go to http://www.nfpa.org;(1) NFPA 70-2002 ("NFPA 70"), National Electrical Code 2002 Edition, IBR approved for § 431.326 ;(e) UL. Underwriters Laboratories, Inc., COMM 2000, 1414 Brook Drive, Downers Grove, IL 60515, 1-888-853-3503, or go to http://www.ul.com.(1) UL 1029 (ANSI/UL 1029-2007) ("UL 1029"), Standard for Safety High-Intensity-Discharge Lamp Ballasts, 5th edition, May 25, 1994, which consists of pages dated May 25, 1994, September 28, 1995, August 3, 1998, February 7, 2001 and December 11, 2007, IBR approved for § 431.326 . 74 FR 12075 , Mar. 23, 2009, as amended at 75 FR 10966 , Mar. 9, 2010; 87 FR 37699 , June 24, 2022