10 C.F.R. § 71.33

Current through September 30, 2024
Section 71.33 - Package description

The application must include a description of the proposed package in sufficient detail to identify the package accurately and provide a sufficient basis for evaluation of the package. The description must include-

(a) With respect to the packaging-
(1) Classification as Type B(U), Type B(M), or fissile material packaging;
(2) Gross weight;
(3) Model number;
(4) Identification of the containment system;
(5) Specific materials of construction, weights, dimensions, and fabrication methods of-
(i) Receptacles;
(ii) Materials specifically used as nonfissile neutron absorbers or moderators;
(iii) Internal and external structures supporting or protecting receptacles;
(iv) Valves, sampling ports, lifting devices, and tie-down devices; and
(v) Structural and mechanical means for the transfer and dissipation of heat; and
(6) Identification and volumes of any receptacles containing coolant.
(b) With respect to the contents of the package-
(1) Identification and maximum radioactivity of radioactive constituents;
(2) Identification and maximum quantities of fissile constituents;
(3) Chemical and physical form;
(4) Extent of reflection, the amount and identity of nonfissile materials used as neutron absorbers or moderators, and the atomic ratio of moderator to fissile constituents;
(5) Maximum normal operating pressure;
(6) Maximum weight;
(7) Maximum amount of decay heat; and
(8) Identification and volumes of any coolants.

10 C.F.R. §71.33