Cal. Code Regs. tit. 8 § 3004
Current through Register 2024 Notice Reg. No. 44, November 1, 2024
Authority for Standard | Date of Issue | Title or Description of Standard | See Section |
| AGMA: | |||
| 420.03 | 1963 | Practice for Helical and Herringbone Gear Speed Reducers | 3091(n) (4) |
| 430.03 | 1963 | Practice for Speed Reducers and Increasers Employing Spiral Bevel Gearing | 3091(n) (4) |
| 440.03 | 1959 | Practice for Single and Double Reduction Cylindrical-Worm and Helical-Worm Speed Reducers | 3091(n) (4) |
| 441.03 | 1963 | Practice for Single and Double-Reduction, Double-Enveloping Worm and Helical-Worm Speed Reducers | 3091(n) (4) |
| 460.04 | 1965 | Practice for Gearmotors | 3091 (n) (4) |
| 480.03 | 1965 | Practice for Helical, Herringbone and Spur Gear Shaft Mounted Speed Reducers | 3091(n) (4) |
| ASTM: | |||
| A36 | 1968 | Specification for Structural Steel | 3101(a) (1) |
| A235 | 1967 | Specifications for Carbon Steel Forgings for General | 3101(a) (1) |
| Industrial Use | 3107(b) (3) | ||
| 3107(b) (5) | |||
| A283 | 1967 | Specifications for Low and Intermediate Tensile Strength Carbon Steel Plate of Structural Quality | 3101(a) (1) |
| A307 | 1967 | Specifications for Low Carbon Steel Externally | 3101(a) (1) |
| and Internally Threaded Standard Fasteners | 3109(b) (2) | ||
| 3111(c) (1) | |||
| 3111(c) (2) | |||
| A502 | 1965 | Specifications for Steel Structural Rivets | 3101(a) (1) |
| 3109(b) (3) | |||
| 3111(c) (2) | |||
| D2270 | 1964 | Viscosity Index from Kinematic Viscosity | 3108(e) |
| SAE: | |||
| 100-R2 | 1967 | High Pressure Steel Wire Reinforced Rubber Covered Hydraulic Hose | 3068(a) (3) |
| Federal | |||
| Specification | |||
| DD-G-451c | 1968 | Glass, Plate, Sheet, Figured (Float, Flat, for Glazing, Corrugated, Mirrors, and Other Uses) | 3034(b) (5) (E) |
| USAS: | |||
| A2.5 | 1963 | Method of Test for Surface Burning Characteristics | 3101(a) (3) |
| ASTM 84 | 1961 | of Building Materials | |
| NFPA 255 | 1961 | ||
| A17.1 and | 1965 | Safety Code for Elevators, Dumbwaiters, Escalators, | 3000(d) |
| Supplements | and Moving Walks | 3108(f)(1) | |
| .1a | 1967 | ||
| .1b | 1968 | ||
| .1c | 1969 | ||
| B2.1 | 1968 | Pipe Threads (Except Dry Seal) | 3102(g) (5) |
| B29.1 | 1963 | Transmission Roller Chains and Sprocket Teeth | 3091(n) (5) |
| B29.2 | 1957 | Inverted Tooth (Silent) Chains and Sprocket Teeth | 3091(n) (5) |
| B31.1.0 | 1967 | Power Piping | 3102(g) (2) |
| B55.1 | 1961 | Specifications for Multiple V-Belt Drives | 3091(n) (6) |
| G50.1 | 1967 | Specifications for Mild to Medium Strength Carbon | 3101(a) (1) |
| ASTM A27 | 1965 | Steel Castings for General Application | 3107(b) (3) |
| Z11.5 | 1966 | Method of Test for Pour Point | 3108(e) |
| ASTM D97 | 1966 | ||
| Z97.1 | 1966 | Performance, Specifications and Method of Test | 3034(a) (7) |
| for Transparent Safety Glazing Materials Used | 3034(b) (5) | ||
| in Buildings | 3089(d) (2) | ||
| 3091(k) (1) | |||
| 3091(l) |
Cal. Code Regs. Tit. 8, § 3004