Cal. Code Regs. tit. 25 § 3039

Current through Register 2024 Notice Reg. No. 52, December 27, 2024
Section 3039 - Insignia of Approval
(a) Each factory-built dwelling, dwelling unit, individual dwelling room or combination of rooms thereof, manufactured and shipped or transported separately pursuant to these regulations, shall have an insignia of approval attached thereto prior to shipment from the factory or place of manufacture. The insignia shall be placed in a visible location as shown on the plans and shall contain the following information:
(1) Name of Manufacturer
(2) Model Designation
(3) Unit Serial Number
(4) Plan Approval Number
(5) Date of Manufacture
(6) Insignia Serial Number
(7) Design wind load and exposure, roof live load, and seismic zone.

The insignia shall be purchased from the department and shall be imprinted by the manufacturer with the information required by 2, 3, 4, 5 and 7 above prior to affixing the insignia to the unit.

(b) Each building component manufactured pursuant to this subchapter shall have an insignia of approval attached thereto prior to shipment from the factory or place of manufacture. The insignia shall be placed in a visible location as shown on the plans and shall contain the plan approval number. The insignia shall be purchased from the department and shall be imprinted by the manufacturer with the plan approval number.
(c) Insignia shall remain the property of the department and may be confiscated by the department or inspection agency in the event of violation of the conditions of approval. In such case, no refund of insignia fees shall be made.

Cal. Code Regs. Tit. 25, § 3039

1. Amendment filed 11-18-86; effective upon filing (Register 86, No. 47).

Note: Authority cited: Sections 17003.5 and 19990, Health and Safety Code. Reference: Sections 19980 and 19990, Health and Safety Code.

1. Amendment filed 11-18-86; effective upon filing (Register 86, No. 47).