Section 66270.27 - Specific Part B Information Requirements for Air Emission Controls for Tanks, Surface Impoundments, and Containers(a) Except as otherwise provided in section 66264.1, owners and operators of tanks, surface impoundments, or containers that use air emission controls in accordance with the requirements of section chapter 14, article 30 shall provide the following additional information: (1) Documentation for each floating roof cover installed on a tank subject to sections 66264.1084(d)(1) or 66264.1084(d)(2) that includes information prepared by the owner or operator or provided by the cover manufacturer or vendor describing the cover design, and certification by the owner or operator that the cover meets the applicable design specifications as listed in sections 66264.1084(e)(1) or 66264.1084(f)(1).(2) Identification of each container area subject to the requirements of chapter 14, article 30 and certification by the owner or operator that the requirements of this article are met.(3) Documentation for each enclosure used to control air pollutant emissions from tanks or containers in accordance with the requirements of sections 66264.1084(d)(5) or 66264.1086(e)(1)(B) that includes records for the most recent set of calculations and measurements performed by the owner or operator to verify that the enclosure meets the criteria of a permanent total enclosure as specified in "Procedure T--Criteria for and Verification of a Permanent or Temporary Total Enclosure" under 40 CFR 52.741, appendix B.(4) Documentation for each floating membrane cover installed on a surface impoundment in accordance with the requirements of section 66264.1085(c) that includes information prepared by the owner or operator or provided by the cover manufacturer or vendor describing the cover design, and certification by the owner or operator that the cover meets the specifications listed in section 66264.1085(c)(1).(5) Documentation for each closed-vent system and control device installed in accordance with the requirements of section 66264.1087 that includes design and performance information as specified in section 66270.24(c) and (d).(6) An emission monitoring plan for both Method 21 in 40 CFR part 60, appendix A and control device monitoring methods. This plan shall include the following information: monitoring point(s), monitoring methods for control devices, monitoring frequency, procedures for documenting exceedances, and procedures for mitigating noncompliances.(7) When an owner or operator of a facility subject to chapter 15, article 28.5 cannot comply with chapter 14, article 28.5 by the date of permit issuance, the schedule of implementation required under section 66265.1082.Cal. Code Regs. Tit. 22, § 66270.27
1. Change without regulatory effect adding new section filed 6-11-99 pursuant to Health and Safety Code section 25159.1 (Register 99, No. 24). Note: Sections 25150, 25159, 25159.5, 25245 and 58012, Health and Safety Code. Reference: Sections 25150, 25159 and 25159.5, Health and Safety Code; and 40 CFR section 270.27.
1. Change without regulatory effect adding new section filed 6-11-99 pursuant to Health and Safety Code section 25159.1 (Register 99, No. 24).