Except as otherwise provided in section 66264.1, owners and operators of facilities that store or treat hazardous waste in waste piles shall provide the following additional information:
(a) a list of hazardous wastes placed or to be placed in each waste pile;(b) detailed plans and an engineering report describing how the waste pile is designed and is or will be constructed, operated and maintained to meet the requirements of sections 66264.19, 66264.251, 66264.252, and 66264.253 of this chapter, addressing the following items:(1)(A) the liner system (except for an existing portion of a waste pile), if the waste pile shall meet the requirements of section 66264.251(a) of this chapter. If an exemption from the requirement for a liner is sought, as provided by section 66264.251(e) of this chapter, submit detailed plans, and engineering and hydrogeological reports, as appropriate, describing alternate designs and operating practices that will, in conjunction with location aspects, prevent the migration of any hazardous constituents into the ground water or surface water at any future time;(B) The double liner and leak (leachate) detection, collection, and removal system, if the waste pile shall meet the requirements of section 66264.251(c) of this chapter. If an exemption from the requirements for double liners and a leak detection, collection, and removal system or alternative design is sought as provided by section 66264.251 (l), (m), or (n) of this chapter, submit appropriate information;(C) If the leak detection system is located in a saturated zone, submit detailed plans and an engineering report explaining the leak detection system design and operation, and the location of the saturated zone in relation to the leak detection system;(D) The construction quality assurance (CQA) plan if required under section 66264.19 of this chapter;(E) Proposed action leakage rate, with rationale, if required under section 66264.252 of this chapter, and response action plan, if required under section 66264.253 of this chapter;(4) management of collection and holding units associated with run-on and run-off control systems; and(5) control of wind dispersal of particulate matter, where applicable;(c) if a double liner and leak detection system is required, as noted by section 66264.251(k), detailed plans and an engineering report describing how the requirements of section 66264.251(k) will be complied with;(d) a description of how each waste pile, including the double liner system, leachate collection and removal system, leak detection system, cover system, and appurtenances for control of run-on and run-off, will be inspected in order to meet the requirements of section 66264.254(a), (b) and (c) of this chapter. This information shall be included in the inspection plan submitted under section 66270.14(b)(5). If a double liner and leak detection system is required, pursuant to section 66264.251(k), describe in the inspection plan how the inspection requirements of section 66264.254(b)(3) will be complied with;(e) if treatment is carried out on or in the waste pile, details of the process and equipment used, and the nature and quality of the residuals;(f) if ignitable or reactive wastes are to be placed in a waste pile, an explanation of how the requirements of section 66264.256 will be complied with;(g) if incompatible wastes, or incompatible wastes and materials will be placed in a waste pile, an explanation of how section 66264.257 will be complied with;(h) a description of how hazardous waste residues and contaminated materials will be removed from the waste pile at closure, as required under section 66264.258(a). For any waste not to be removed from the waste pile upon closure, the owner or operator shall submit detailed plans and an engineering report describing how sections 66264.310(a) and (b) will be complied with. This information shall be included in the closure plan and, where applicable, the post-closure plan submitted under section 66270.14(b)(13);(i) a waste management plan for EPA Hazardous Waste Nos. F020, F021, F022, F023, F026, and F027 describing how a waste pile in which any of these wastes has been or will be placed is or will be designed, constructed, operated, and maintained to meet the requirements of section 66264.259. This submission shall address the following items as specified in section 66264.259: (1) the volume, physical, and chemical characteristics of the wastes to be disposed in the waste pile, including their potential to migrate through soil or to volatilize or escape into the atmosphere;(2) the attenuative properties of underlying and surrounding soils or other materials;(3) the mobilizing properties of other materials co-disposed with these wastes; and(4) the effectiveness of additional treatment, design, or monitoring techniques.Cal. Code Regs. Tit. 22, § 66270.18
1. New section filed 5-24-91; operative 7-1-91 (Register 91, No. 22).
2. Amendment of subsections (b)-(b)(1), designation of subsection (b)(1)(A), new subsections (b)(1)(B)-(E), and amendment of subsection (d) and NOTE filed 7-19-95; operative 8-18-95 (Register 95, No. 29).
3. Change without regulatory effect amending subsection (b)(1)(B) filed 6-30-97 pursuant to section 100, title 1, California Code of Regulations (Register 97, No. 27). Note: Authority cited: Sections 25150 and 25159, Health and Safety Code; and Governor's Reorganization Plan Number 1 of 1991. Reference: Sections 25159 and 25159.5, Health and Safety Code; and 40 CFR Section 270.18.
1. New section filed 5-24-91; operative 7-1-91 (Register 91, No. 22).
2. Amendment of subsections (b)-(b)(1), designation of subsection (b)(1)(A), new subsections (b)(1)(B)-(E), and amendment of subsection (d) and Note filed 7-19-95; operative 8-18-95 (Register 95, No. 29).
3. Change without regulatory effect amending subsection (b)(1)(B) filed 6-30-97 pursuant to section 100, title 1, California Code of Regulations (Register 97, No. 27).