Section 66265.1032 - Standards: Process Vents(a) The owner or operator of a facility with process vents associated with distillation, fractionation, thin-film evaporation, solvent extraction or air or steam stripping operations managing hazardous wastes with organic concentrations at least 10 ppmw shall either: (1) reduce total organic emissions from all affected process vents at the facility below 1.4 kg/h (3 1b/h) and 2.8 Mg/yr (3.1 tons/yr); or(2) reduce, by use of a control device, total organic emissions from all affected process vents at the facility by 95 weight percent.(b) If the owner or operator installs a closed-vent system and control device to comply with the provisions of Subsection (a) of this section, the closed-vent system and control device shall meet the requirements of Section 66265.1033.(c) Determinations of vent emissions and emission reductions or total organic compound concentrations achieved by add-on control devices may be based on engineering calculations or performance tests. If performance tests are used to determine vent emissions, emission reductions, or total organic compound concentrations achieved by add-on control devices, the performance tests shall conform with the requirements of Section 66265.1034(c).(d) When an owner or operator and the Department do not agree on determinations of vent emissions and/or emission reductions or total organic compound concentrations achieved by add-on control devices based on engineering calculations, the test methods in Section 66265.1034(c) shall be used to resolve the disagreement.Cal. Code Regs. Tit. 22, § 66265.1032
1. New section filed 12-23-92; operative 1-22-93 (Register 93, No. 2). Note: Authority cited: Sections 25150 and 25159, Health and Safety Code. Reference: Sections 25159 and 25159.5, Health and Safety Code; 40 CFR, Section 66265.1032.
1. New section filed 12-23-92; operative 1-22-93 (Register 93, No. 2).