Section 64690.10 - Data ReportingEach system shall report the following within the first 10 days after the end of each period during which such sampling or monitoring was conducted:
(a) For lead and copper tap sampling:(1) The results of all tap samples including the location of each site and the associated tier criteria from section 64676 (Sample Site Selection);(2) The 90th percentile lead and copper concentrations calculated pursuant to section 64678 (Determination of Exceedances of Lead and Copper Action Levels); and(3) With the exception of the first period of tap sampling, an identification of any site that was not sampled during previous periods, along with an explanation of why the sampling site was changed;(b) For WQP monitoring, the results of all samples collected and analyzed pursuant to article 4 (WQP Monitoring) of this chapter;(c) For source water monitoring: (1) The results for all samples related to source water collected and analyzed under article 6 (Source Water Requirements for Action Level Exceedances) of this chapter; and(2) With the exception of the first round of sampling related to source water, an identification of any site that was not sampled during previous periods along with an explanation of why the sampling point was changed; and(d) The results for any samples collected and analyzed for lead and copper or WQPs in addition to those required by this chapter.Cal. Code Regs. Tit. 22, § 64690.10
1. Repealer of former article 9 (sections 64691-64692), new article 9 (sections 64690.10-64690.80) and new section filed 9-11-2003; operative 10-11-2003 (Register 2003, No. 37). Note: Authority cited: Sections 100275, 116350, 116365 and 116375, Health and Safety Code. Reference: Sections 116325- 116750, Health and Safety Code.
1. Repealer of former article 9 (sections 64691-64692), new article 9 (sections 64690.10-64690.80) and new section filed 9-11-2003; operative 10-11-2003 (Register 2003, No. 37).