Cal. Code Regs. Tit. 21, div. 2.5, tbl. 2
Current through Register 2024 Notice Reg. No. 49, December 6, 2024
Airplane Design Group | ||||||
| DIM4 | ||||||
| I5 | I | II | III | IV | ||
| Runway Safety | ||||||
| Area Width | A | 120 ft | 120 ft | 150 ft | 300 ft | 500 ft |
| Runway Safety | ||||||
| Area Length beyond | B | 240 ft | 240 ft | 300 ft | 600 ft | 1000 ft |
| end of Runway6 | ||||||
4 These letters correspond to the dimensions on Figure 2.
5 These dimensional standards pertain to facilities for small airplanes exclusively. "Small airplane" means an airplane of 12,500 pounds or less maximum certificated takeoff weight.
6 The runway safety area length begins at each runway end if there is no stopway provided. When stopway is provided, the length begins at the stopway end.
Cal. Code Regs. Tit. 21, div. 2.5, tbl. 2