Cal. Code Regs. tit. 21 § 5080

Current through Register 2024 Notice Reg. No. 50, December 13, 2024
Section 5080 - Purpose and Scope
(a) Purpose. This specification establishes the minimum requirements for instrumentation to be utilized by airport proprietors required to monitor aircraft noise in accordance with this subchapter.
(b) Scope. The measurement systems defined herein shall be used to monitor noise levels at specifically designated locations in a community surrounding an airport.
(c) Design Goals. The design goals for the noise monitoring system are accuracy, reliability, and ease of maintenance. The measurement techniques set forth herein are sufficiently uncomplicated so that current state-of-the-art instrumentation equipment may be used. The monitor system specifications are not intended to be unduly restrictive in specifying individual system components. The specifications allow the utilization of equipment ranging from analog systems to automated computer systems. The exact configuration will depend upon the specific monitoring requirement and the nature of existing user instrumentation.

This is a total systems specification. It is the prerogative of the user to configure the system with components that will be most compatible with his existing equipment and personnel.

Cal. Code Regs. Tit. 21, § 5080

1. Amendment of subsection (b) filed 5-23-79; effective thirtieth day thereafter (Register 79, No. 21).
2. Amendment filed 2-20-90; operative 3-22-90 (Register 90, No. 10).

Note: Authority cited: Sections 21243 and 21669, Public Utilities Code. Reference: Air Transport Association of America v. Crotti (N.D.Cal. 1975) 389 F.Supp. 58.

1. Amendment of subsection (b) filed 5-23-79; effective thirtieth day thereafter (Register 79, No. 21).
2. Amendment filed 2-20-90; operative 3-22-90 (Register 90, No. 10).