Cal. Code Regs. tit. 19 § 1918.33
Current through Register 2024 Notice Reg. No. 49, December 6, 2024
Where vapor return piping is inside the dispenser enclosure or where it may impair the effective operation of an impact valve in the liquid pipe, a shear section shall be properly installed in the vapor return piping at the base of each dispenser. Properly installed means the shear section is mounted flush (plus/minus 3/4") with the top of the surface upon which the dispenser is mounted. Shear sections shall be tested in accordance with applicable provisions of this subchapter.
Cal. Code Regs. Tit. 19, § 1918.33
Note: Authority cited: Section 41956, Health and Safety Code. Reference: Sections 41956 and 41958, Health and Safety Code.