The required subjects of instruction in Hair Dressing shall be completed with the minimum hours of technical instruction and practical operations for each subject-matter as follows:
Hairstyling (95 hours of Technical Instruction and 450 Practical Operations):
The subject of Hairstyling shall include, but is not limited to, the following techniques and procedures: Hair analysis, shampooing, finger waving, pin curling, comb outs, straightening, waving, curling with hot combs and hot curling irons and blower styling.
Permanent Waving and Chemical Straightening (40 hours of Technical Instruction and 120 Practical Operations):
The subject of Permanent Waving and Chemical Straightening shall Include, but is not limited to, the following techniques and procedures: Hair analysis, acid and alkaline permanent waving, chemical straightening including the use of sodium hydroxide and other base solutions.
Hair Coloring and Bleaching (65 hours of Technical Instruction and 50 Practical Operations):
The subject of Hair Coloring and Bleaching shall include, but is not limited to, the following techniques and procedures (also including, the use of semi-permanent, demi-permanent and temporary colors): Hair analysis, predisposition and strand tests, safety precautions, formula mixing, tinting, bleaching, high and low lights, and the use of dye removers.
Hair Cutting (20 hour of Technical Instruction and 300 Practical Operations):
The subject of Hair Cutting shall include, but is not limited to, the following techniques and procedures: Use of scissors, razor (shaper), electrical clippers/trimmers, and thinning (tapering) shears for wet and dry cutting.
The required subjects of instruction in Shaving shall be completed with the minimum hours of technical instruction and practical operations for each subject-matter as follows:
Preparation and Performance (100 hours of Technical Instruction and 40 Practical Operations)
The subject of Preparation and Performance shall include, but is not limited to the following techniques and procedures: Preparing the client's hair for shaving, assessing the condition of the client's skin, performing shaving techniques, applying after-shave antiseptic following facial services, massaging the client's face and rolling cream massages.
The required subjects of instruction in Health and Safety shall be completed with the minimum hours of technical instruction for each subject-matter as follows:
Laws and Regulations (20 hours of Technical Instruction)
The subjects of Laws and Regulations shall include, but is not limited to, the following issues: The Barbering and Cosmetology Act and the Board's Rules and Regulations.
Health and Safety Considerations (45 hours of Technical Instruction)
Health and Safety/hazardous substances including training in chemicals and health in establishments, material safety data sheets, protection from hazardous chemicals and preventing chemical injuries, health and safety laws and agencies, bacteriology and preventing communicable diseases including HIV/AIDS and Hepatitis B.
Disinfection and Sanitation (20 hours of Technical Instruction)
The subject of Disinfection and Sanitation shall include, but is not limited to the following techniques and procedures: Disinfection and sanitation including proper procedures to protect the health and safety of the consumer as well as the technician, and proper disinfection procedures for equipment used in establishments.
Disinfection shall be emphasized throughout the entire training period and must be performed before use of all instruments and equipment.
Anatomy and Physiology (15 hours of Technical Instruction)
The subjects of Anatomy and Physiology shall include, but is not limited to the following issues: Human Anatomy, Human Physiology.
Cal. Code Regs. Tit. 16, § 921
2. Repealer and new section and amendment of NOTE filed 4-1-2015; operative 7-1-2015 (Register 2015, No. 14).
Note: Authority cited: Sections 7312 and 7334(f), Business and Professions Code. Reference: Sections 7316(a), 7321.5(d)(2), 7362(b), 7362.5(a) and 7389, Business and Professions Code; and Section 3078, Labor Code.