Section 17896.18 - General Design Requirements(a) The design of a new in-vessel digestion operation or facility shall utilize expert advice, as appropriate, from persons competent in engineering, architecture, landscape design, traffic engineering, air quality control, water quality protection and design of structures.(b) The design shall be based on appropriate data regarding the expected service area, anticipated nature and quantity of wastes to be received, climatological factors, physical settings, adjacent land use (existing and planned), types and number of vehicles anticipated to enter the operation or facility, adequate off-street parking facilities for transfer vehicles, drainage control, the hours of operation and other pertinent information. If the operation or facility is to be used by the general public, the design shall take account of safety features that may be needed to accommodate such public use.(c) The in-vessel digestion operation or facility shall be designed in such a manner as to restrict the unloading area to as small an area as practicable, provide adequate control of windblown material, minimize the propagation or attraction of flies, rodents or other vectors and the creation of nuisances by reason of solid wastes being handled at the operation. Other factors which shall be taken into consideration are: dust control, noise control, public safety, and other pertinent matters related to the protection of public health at the operation or facility.(d) In reviewing the design of a proposed in-vessel anaerobic digestion operation or facility, the EA may require the applicant to describe how he or she has complied with applicable local and state requirements regarding odor control measures, personnel health and safety, and sanitary facilities.(e) Solid waste storage containers shall be durable, easily cleanable, designed for safe handling, and constructed to prevent loss of wastes from the container during storage. If such a container is used to store garbage, other wet or liquid producing wastes, or wastes composed of fine particles, such container shall in all cases be nonabsorbent and leak-resistant. Unloading areas shall be easily cleanable, designed for safe handling and constructed to prevent loss of wastes.Cal. Code Regs. Tit. 14, § 17896.18
1. New section filed 11-10-2015; operative 1-1-2016 (Register 2015, No. 46). Note: Authority cited: Sections 40502, 43020 and 43021, Public Resources Code. Reference: Sections 40053, 43020 and 43021, Public Resources Code.
1. New section filed 11-10-2015; operative 1/1/2016 (Register 2015, No. 46).