Section 2468.8 - Performance Standard Test Procedures(a) Testing to determine compliance with Section 2468.1(a) of this article shall be performed by using the following procedures: (1) "CP-510, Certification Procedure for Portable Outboard Marine Tanks and Components," adopted July 20, 2009, which is incorporated by reference herein.(2) "Test Procedure 511, Diurnal Rate from Portable Outboard Marine Tanks", adopted July 20, 2009, which is incorporated by reference herein.(b) Testing to determine compliance with Section 2468.2(a) of this article shall be performed by using the following procedures: (1) "CP-510, Certification Procedure for Portable Outboard Marine Tanks and Components," adopted July 20, 2009, which is incorporated by reference herein.(2) "Test Procedure 512, Permeation Rate from Portable Outboard Marine Tank Fuel Hoses and Portable Outboard Marine Tank Primer Bulbs", adopted July 20, 2009, which is incorporated by reference herein.(c) Alternative methods that are shown to be accurate, precise, and appropriate may be used upon written approval of the Executive Officer.(d) Test procedures referred to in this Article can be obtained from the California Air Resources Board, and may be available at http://www.arb.ca.gov/omt/omt.htm.Cal. Code Regs. Tit. 13, § 2468.8
1. New section filed 9-16-2009; operative 10-16-2009 (Register 2009, No. 38). Note: Authority cited: Sections 39600, 39601, 43013, 43018 and 43101, Health and Safety Code; and Western Oil and Gas Ass'n. v. Orange County Pollution Control District, 14 Cal.3d 411, 121 Cal.Rptr. 249 (1975). Reference: Sections 39000, 39001, 39003, 39500, 39515, 39516, 41511, 43000, 43013, 43016, 43017 and 43018, Health and Safety Code; and Western Oil and Gas Ass'n. v. Orange County Pollution Control District, 14 Cal.3d 411, 121 Cal.Rptr. 249 (1975).
1. New section filed 9-16-2009; operative 10-16-2009 (Register 2009, No. 38).