Section 3010 - [Operative 1/1/2025] Labeling Requirements(a) A Responsible Official for a Fleet Operator required to label a Forklift pursuant to an exemption or extension as set forth in Section 3007 of this Regulation shall: (1) Report all applicable entity and Forklift information, as required, to the Executive Officer in accordance with this Regulation;(2) Affix at least one EIN label to each applicable Forklift within 30 calendar days of receiving the EIN for such Forklifts (CARB will assign a unique EIN to each Forklift once reported);(3) Maintain all labels affixed pursuant to Section 3010, so that they remain permanently affixed to the LSI Forklift and the legibility and visibility criteria set forth in Section 3010(b) are met at all times; and(4) Maintain records of the Forklift purchase date or the date the Forklift enters the fleet for newly purchased or acquired Forklifts that are subject to these labeling requirements but have not yet been labeled pursuant to Section 3010.(b) Label Specifications. Each label affixed pursuant to Section 3010 shall meet all the following specifications: (1) Each label shall contain the assigned EIN;(2) The label shall be permanently affixed to the LSI Forklift. The label shall be applied as a decal or painted directly onto the LSI Forklift;(3) The EIN shall be in white on a red background for any LSI Forklift;(4) The label shall be located in clear view on the outside of the LSI Forklift approximately two feet above the ground so that the label remains visible;(5) Each character of the EIN shall be at least three inches (7.6 centimeters) in height and 1.5 inches (3.8 centimeters) in width; and(6) Each character of the EIN shall remain legible for the entire life of the LSI Forklift.Cal. Code Regs. Tit. 13, § 3010
Note: Authority cited: Sections 39600, 39601, 43101, 43102, 43013, 43018, 43151, 43152, 43153 and 43205.5, Health and Safety Code. Reference: Section 43150, Health and Safety Code.
1. New section filed 9-16-2024; operative 1/1/2025 (Register 2024, No. 38).