Current through Register Vol. 30, No. 45, November 8, 2024
Section R9-7-1720 - Inspection, Maintenance, and Opening of a Source or Source HolderA. Each licensee shall visually check source holders, logging tools, and source handling tools for defects before each use to ensure that the equipment is in good working condition and that required labeling is present. If defects are found, the licensee shall remove equipment from service until it is repaired, and make a record listing: date of check, name of inspector, equipment involved, each defect found, and repairs made. The licensee shall maintain each record for three years after a defect is found.B. Each licensee shall have a program for semiannual visual inspection and routine maintenance of source holders, logging tools, injection tools, source handling tools, storage containers, transport containers, and uranium sinker bars to ensure that the required labeling is legible and that no physical damage is visible. If any defect is found, the licensee shall remove the equipment from service until it is repaired, and make a record listing; date of inspection, equipment involved, inspection and maintenance operations performed, each defect found, and each action taken to correct a defect. The licensee shall maintain each record for three years after a defect is found.C. A licensee shall not remove a sealed source from a source holder or logging tool, or perform maintenance on a sealed sourceor source holder that contains a sealed source without written permission from the Department.D. If a sealed source is stuck in the source holder, a licensee shall not perform any operation, such as drilling, cutting, or chiseling, on the source holder unless the licensee is specifically authorized to perform the operation by the Department.E. The opening, repair, or modification of any sealed source is prohibited, unless authorized by the Department, the NRC, or an Agreement State.Ariz. Admin. Code § R9-7-1720
New Section R9-7-1720 recodified from R12-1-1720 at 24 A.A.R. 813, effective March 22, 2018 (Supp. 18-1).