Current through Register Vol. 30, No. 50, December 13, 2024
Section R9-7-1422 - Laser Protective DevicesA. A registrant shall ensure that each laser product has a protective housing that prevents access to laser and collateral radiation if it exceeds the exposure limits for Class 1 lasers in R9-7-1426. If a laser's accessible emission levels must exceed the limits for Class 1 lasers, the registrant shall use a laser from the lowest class that will enable the registrant to perform the intended function.B. To prevent access to radiation above the applicable MPE, a registrant shall ensure that each laser has a safety interlock, which prevents operation of the laser if a person has removed any portion of the protective housing that can be removed or displaced without the use of tools during normal operation or maintenance. The registrant shall ensure that: 1. Service, testing, or maintenance of a laser does not render the interlocks inoperative or increase radiation outside the protective housing to levels that exceed the applicable MPE, unless a controlled area is established as specified in R9-7-1433;2. For pulsed lasers, interlocks are designed to prevent the laser from firing;3. For Class 3b and 4 continuous wave (cw) lasers, interlocks turn off the power supply or interrupt the beam.4. An interlock does not allow automatic accessibility to radiation emission above the applicable MPE when the interlock is closed; and5. Multiple safety interlocks or a means to preclude removal or displacement of the interlocked portion of the protective housing is provided if failure of a single interlock could result in: a. Human access to levels of laser radiation that exceed the radiant power accessible emission limit for Class 3a laser radiation, orb. Laser radiation that exceeds the accessible emission limit for Class 2, emitted directly through the opening created by removal or displacement of a portion of the protective housing.C. A registrant shall ensure that a laser with viewing ports, viewing optics, or display screens, included as an integral part of the enclosed laser or laser system has: 1. A suitable means to attenuate laser and collateral radiation transmitted through the optical system to less than the accessible emission limit for collateral radiation required by 21 CFR 1040.10, April 1, 2004, which is incorporated by reference, published by the Office of Federal Register National Archives and Records Administration, Washington, D.C. 20408, and on file with the Department. This incorporation by reference contains no future editions or amendments; and2. Specific written administrative procedures developed by the LSO, and use controls, such as interlocks or filters, if there is increased hazard to the eye or skin associated with the use of optical systems such as lenses, telescopes, or microscopes.D. A registrant shall ensure that each Class 3 or 4 laser product provides a visual or audible indication before the emission of accessible laser radiation that exceeds the limits for Class 1, as follows: 1. For Class 3, except for laser products that allow access to less than 5 milliwatts peak visible laser radiation, and Class 4 lasers, the indication occurs before the emission of the radiation and allows enough time for action to avoid exposure;2. Any visual indicator is clearly visible through protective eyewear designed specifically for the wavelength of the emitted laser radiation;3. If the laser and laser energy source are housed separately and can be operated at a separation distance of greater than 2 meters, both the laser and laser energy source incorporate visual or audible indicators; and4. Any visual indicators are positioned so that viewing does not require human access to laser radiation that exceeds the applicable MPE.E. In addition to the information signs, symbols, and labels prescribed in R9-7-1427, R9-7-1428, and R9-7-1429, each registrant shall provide, near the signs, symbols, and labels within the laser facility, operating procedure restrictions and any other safety information required to ensure compliance with this Article and minimize exposure to laser and collateral radiation.Ariz. Admin. Code § R9-7-1422
New Section R9-7-1422 recodified from R12-1-1422 at 24 A.A.R. 813, effective March 22, 2018 (Supp. 18-1).