Ariz. Admin. Code § 9-7-1142

Current through Register Vol. 30, No. 50, December 13, 2024

Section R9-7-1142 - Baggage and Package Inspection Systems

A. For x-ray systems designed to screen carry-on baggage or packages at airlines, railroads, bus terminals, package inspection facilities, or similar facilities, a registrant shall ensure the x-ray system has an operator present at the control area in a position that permits surveillance of the ports and doors during generation of x-radiation to prevent exposure to passengers and other members of the public.

B. For an exposure or preset succession of exposures of one-half second or greater duration, a registrant shall use a system that enables the operator to terminate the exposure or preset succession of exposures at any time.

C. For an exposure or preset succession of exposures of less than one-half second duration, a registrant shall use a system that allows the operator to complete the exposure in progress, but prevent additional exposures.

D. A registrant shall operate a baggage or package inspection system according to the manufacturer's instructions.

E. A registrant shall not disconnect or otherwise tamper with the safety systems of a baggage or package inspection system, except for maintenance purposes.

F. In addition to the requirements in this Section, a registrant using a baggage or package inspection system shall meet the requirements in R9-7-1140(A), (B), and (D).

Ariz. Admin. Code § R9-7-1142

New Section R9-7-1142 recodified from R12-1-1142 at 24 A.A.R. 813, effective March 22, 2018 (Supp. 18-1).