Ariz. Admin. Code § 18-2-901

Current through Register Vol. 30, No. 50, December 13, 2024

Section R18-2-901 - Standards of Performance for New Stationary Sources

Except as provided in R18-2-902 through R18-2-905, the following subparts of 40 CFR 60, New Source Performance Standards (NSPS), and all accompanying appendices, adopted as of June 28, 2013, unless otherwise specified, and no future editions or amendments, are incorporated by reference as applicable requirements. These standards are on file with the Department and shall be applied by the Department. These standards can be obtained from the U.S. Government Printing Office, Superintendent of Documents, bookstore.gpo.gov, Mail Stop: SSOP IDCC-SSOM, Washington, D.C. 20402-9328.

1. Subpart A - General Provisions.

2. Subpart D - Standards of Performance for Fossil-Fuel- Fired Steam Generators for Which Construction is Commenced After August 17, 1971.

3. Subpart Da - Standards of Performance for Electric Utility Steam Generating Units for Which Construction is Commenced After September 18, 1978.

4. Subpart Db - Standards of Performance for Industrial- Commercial-Institutional Steam Generating Units.

5. Subpart Dc - Standards of Performance for Small Industrial- Commercial-Institutional Steam Generating Units.

6. Subpart E - Standards of Performance for Incinerators.

7. Subpart Ea - Standards of Performance for Municipal Waste Combustors for Which Construction is Commenced after December 20, 1989 and on or Before September 20, 1994.

8. Subpart Eb - Standards of Performance for Large Municipal Waste Combustors for Which Construction is Commenced after September 20, 1994 or for Which Modification or Reconstruction is Commenced After June 19, 1996.

9. Subpart Ec - Standards of Performance for Hospital/Medical/ Infectious Waste Incinerators for Which Construction is Commenced After June 20, 1996.

10. Subpart F - Standards of Performance for Portland Cement Plants.

11. Subpart G - Standards of Performance for Nitric Acid Plants.

12. Subpart Ga - Standards of Performance for Nitric Acid Plants for which Construction, Reconstruction, or Modification Commenced after October 14, 2011.

13. Subpart H - Standards of Performance for Sulfuric Acid Plants.

14. Subpart I - Standards of Performance for Hot Mix Asphalt Facilities.

15. Subpart J - Standards of Performance for Petroleum Refineries.

16. Subpart Ja - Standards of Performance for Petroleum Refineries for Which Construction, Reconstruction, or Modification Commenced After May 14, 2007.

17. Subpart K - Standards of Performance for Storage Vessels for Petroleum Liquids for Which Construction, Reconstruction, or Modification Commenced After June 11, 1973, and Prior to May 19, 1978.

18. Subpart Ka - Standards of Performance for Storage Vessels for Petroleum Liquids for Which Construction, Reconstruction, or Modification Commenced After May 18, 1978, and Prior to July 23, 1984.

19. Subpart Kb - Standards of Performance for Volatile Organic Liquid Storage Vessels (Including Petroleum Liquid Storage Vessels) for Which Construction, Reconstruction, or Modification Commenced after July 23, 1984.

20. Subpart L - Standards of Performance for Secondary Lead Smelters.

21. Subpart M - Standards of Performance for Secondary Brass and Bronze Production Plants.

22. Subpart N - Standards of Performance for Primary Emissions from Basic Oxygen Process Furnaces for Which Construction is Commenced After June 11, 1973.

23. Subpart Na - Standards of Performance for Secondary Emissions from Basic Oxygen Process Steelmaking Facilities for Which Construction is Commenced After January 20, 1983.

24. Subpart O - Standards of Performance for Sewage Treatment Plants.

25. Subpart P - Standards of Performance for Primary Copper Smelters.

26. Subpart Q - Standards of Performance for Primary Zinc Smelters.

27. Subpart R - Standards of Performance for Primary Lead Smelters.

28. Subpart S - Standards of Performance for Primary Aluminum Reduction Plants.

29. Subpart T - Standards of Performance for Phosphate Fertilizer Industry: Wet-Process Phosphoric Acid Plants.

30. Subpart U - Standards of Performance for Phosphate Fertilizer Industry: Superphosphoric Acid Plants.

31. Subpart V - Standards of Performance for Phosphate Fertilizer Industry: Diammonium Phosphate Plants.

32. Subpart W - Standards of Performance for Phosphate Fertilizer Industry: Triple Superphosphate Plants.

33. Subpart X - Standards of Performance for Phosphate Fertilizer Industry: Granular Triple Superphosphate Storage Facilities.

34. Subpart Y - Standards of Performance for Coal Preparation Plants.

35. Subpart Z - Standards of Performance for Ferroalloy Production Facilities.

36. Subpart AA - Standards of Performance for Steel Plants: Electric Arc Furnaces Constructed After October 21, 1974, and On or Before August 17, 1983.

37. Subpart AAa - Standards of Performance for Steel Plants: Electric Arc Furnaces and Argon-Oxygen Decarburization Vessels Constructed After August 7, 1983.

38. Subpart BB - Standards of Performance for Kraft Pulp Mills.

39. Subpart CC - Standards of Performance for Glass Manufacturing Plants.

40. Subpart DD - Standards of Performance for Grain Elevators.

41. Subpart EE - Standards of Performance for Surface Coating of Metal Furniture.

42. Subpart GG - Standards of Performance for Stationary Gas Turbines.

43. Subpart HH - Standards of Performance for Lime Manufacturing Plants.

44. Subpart KK - Standards of Performance for Lead-Acid Battery Manufacturing Plants.

45. Subpart LL - Standards of Performance for Metallic Mineral Processing Plants.

46. Subpart MM - Standards of Performance for Automobile and Light Duty Truck Surface Coating Operations.

47. Subpart NN - Standards of Performance for Phosphate Rock Plants.

48. Subpart PP - Standards of Performance for Ammonium Sulfate Manufacture.

49. Subpart QQ - Standards of Performance for Graphic Arts Industry: Publication Rotogravure Printing.

50. Subpart RR - Standards of Performance for Pressure Sensitive Tape and Label Surface Coating Operations.

51. Subpart SS - Standards of Performance for Industrial Surface Coating: Large Appliances.

52. Subpart TT - Standards of Performance for Metal Coil Surface Coating.

53. Subpart UU - Standards of Performance for Asphalt Processing and Asphalt Roofing Manufacture.

54. Subpart VV - Standards of Performance for Equipment Leaks of VOC in the Synthetic Organic Chemicals Manufacturing Industry.

55. Subpart VVa - Standards of Performance for Equipment Leaks of VOC in the Synthetic Organic Chemicals Manufacturing Industry for Which Construction, Reconstruction, or Modification Commenced after November 7, 2006.

56. Subpart WW - Standards of Performance for Beverage Can Surface Coating Industry.

57. Subpart XX - Standards of Performance for Bulk Gasoline Terminals.

58. Subpart AAA - Standards of Performance for New Residential Wood Heaters.

59. Subpart BBB - Standards of Performance for Rubber Tire Manufacturing Industry.

60. Subpart DDD - Standards of Performance for Volatile Organic Compound (VOC) Emissions from the Polymer Manufacturing Industry.

61. Subpart FFF - Standards of Performance for Flexible Vinyl and Urethane Coating and Printing.

62. Subpart GGG - Standards of Performance for Equipment Leaks of VOC in Petroleum Refineries.

63. Subpart GGGa - Standards of Performance for Equipment Leaks of VOC in Petroleum Refineries for Which Construction, Reconstruction, or Modification Commenced After November 7, 2006.

64. Subpart HHH - Standards of Performance for Synthetic Fiber Production Facilities.

65. Subpart III - Standards of Performance for Volatile Organic Compound (VOC) Emissions from the Synthetic Organic Chemical Manufacturing Industry (SOCMI) Air Oxidation Unit Processes.

66. Subpart JJJ - Standards of Performance for Petroleum Dry Cleaners.

67. Subpart KKK - Standards of Performance for Equipment Leaks of VOC from Onshore Natural Gas Processing Plants.

68. Subpart LLL - Standards of Performance for Onshore Natural Gas Processing; SO2 Emissions.

69. Subpart NNN - Standards of Performance for Volatile Organic Compound (VOC) Emissions From Synthetic Organic Chemical Manufacturing Industry (SOCMI) Distillation Operations.

70. Subpart OOO - Standards of Performance for Nonmetallic Mineral Processing Plants.

71. Subpart PPP - Standards of Performance for Wool Fiberglass Insulation Manufacturing Plants.

72. Subpart QQQ - Standards of Performance for VOC Emissions From Petroleum Refinery Wastewater Systems.

73. Subpart RRR - Standards of Performance for Volatile Organic Compound Emissions From Synthetic Organic Chemical Manufacturing Industry (SOCMI) Reactor Processes.

74. Subpart SSS - Standards of Performance for Magnetic Tape Coating Facilities.

75. Subpart TTT - Standards of Performance for Industrial Surface Coating: Surface Coating of Plastic Parts for Business Machines.

76. Subpart UUU - Standards of Performance for Calciners and Dryers in Mineral Industries.

77. Subpart VVV - Standards of Performance for Polymeric Coating of Supporting Substrates Facilities.

78. Subpart WWW - Standards of Performance for Municipal Solid Waste Landfills.

79. Subpart XXX - Standards of Performance for Municipal Solid Waste Landfills that Commenced Construction, Reconstruction, or Modification After July 17, 2014. This subpart and all accompanying appendices are adopted as of August 29, 2016 (and no future amendments), and are incorporated by reference as applicable requirements.

80. Subpart AAAA - Standards of Performance for Small Municipal Waste Combustion Units for Which Construction Is Commenced after August 30, 1999, or for Which Modification or Reconstruction Is Commenced after June 6, 2001.

81. Subpart CCCC - Standards of Performance for Commercial and Industrial Solid Waste Incineration Units for Which Construction Is Commenced after November 30, 1999, or for Which Modification or Reconstruction Is Commenced on or after June 1, 2001.

82. Subpart EEEE - Standards of Performance for Other Solid Waste Incineration Units for Which Construction is Commenced After December 9, 2004, or for Which Modification or Reconstruction is Commenced on or After June 16, 2006.

83. Subpart IIII - Standards of Performance for Stationary Compression Ignition Combustion Engines.

84. Subpart JJJJ - Standards of Performance for Stationary Spark Ignition Internal Combustion Engines.

85. Subpart KKKK - Standards of Performance for Stationary Combustion Turbines.

86. Subpart LLLL - Standards of Performance for New Sewage Sludge Incineration Units.

87. Subpart OOOO - Standards of Performance for Crude Oil and Natural Gas Production, Transmission and Distribution.

Ariz. Admin. Code § R18-2-901

Adopted effective February 26, 1988 (Supp. 88-1). Amended effective September 26, 1990 (Supp. 90-3). Amended effective February 3, 1993 (Supp. 93-1). Section R18-2-901 renumbered to R18-2-1101, new Section R18-2-901 renumbered from R18-2-801 and amended effective November 15, 1993 (Supp. 93-4). Amended effective June 10, 1994 (Supp. 94-2). Amended effective December 7, 1995 (Supp. 95-4). Amended effective May 9, 1996 (Supp. 96-2). Amended effective April 4, 1997; filed with the Office of the Secretary of State March 14, 1997 (Supp. 97-1). Amended effective December 4, 1997 (Supp. 97-4). Amended by final rulemaking at 5 A.A.R. 3058, effective August 10, 1999, and at 5 A.A.R. 3221, effective August 12, 1999 (Supp. 99-3). Amended by final rulemaking at 6 A.A.R. 4170, effective October 11, 2000 (Supp. 00-4). Amended by final rulemaking at 8 A.A.R. 2543, effective May 24, 2002 (Supp. 02-2). Amended by final rulemaking at 10 A.A.R. 3281, effective September 27, 2004 (Supp. 04-3). Amended by final rulemaking at 11 A.A.R. 5504, effective February 4, 2006 (Supp. 05-4). Amended by final rulemaking at 13 A.A.R. 4199, effective January 5, 2008 (Supp. 07-4). Amended by expedited rulemaking at 21 A.A.R. 2747, effective 12/13/2015. Amended by final expedited rulemaking at 24 A.A.R. 1564, effective 5/2/2018. Amended by final rulemaking at 24 A.A.R. 1864, effective 8/10/2018.