Ariz. Admin. Code § 18-2-317.02

Current through Register Vol. 30, No. 50, December 13, 2024

Section R18-2-317.02 - Procedures for Certain Changes that Do Not Require a Permit Revision - Class II

A. Except for a physical change or change in the method of operation at a Class II source requiring a permit revision under R18-2-317.01, or a change subject to logging or notice requirements in subsection (B) or (C), a change at a Class II source shall not be subject to revision, notice, or logging requirements under this Chapter.

B. Except as otherwise provided in the conditions applicable to an emissions cap created under R18-2-306.02, the following changes may be made if the source keeps onsite records of the changes according to Appendix 3:

1. Implementing an alternative operating scenario, including raw material changes;

2. Changing process equipment, operating procedures, or making any other physical change if the permit requires the change to be logged;

3. Engaging in any new insignificant activity listed in the definition of insignificant activities in R18-2-101 but not listed in the permit;

4. Replacing an item of air pollution control equipment listed in the permit with an identical (same model, different serial number) item. The Director may require verification of efficiency of the new equipment by performance tests; and

5. A change that results in a decrease in actual emissions if the source wants to claim credit for the decrease in determining whether the source has a net emissions increase for any purpose. The logged information shall include a description of the change that will produce the decrease in actual emissions. A decrease that has not been logged is creditable only if the decrease is quantifiable, enforceable, and otherwise qualifies as a creditable decrease.

C. Except as provided in the conditions applicable to an emissions cap created under R18-2-306.02, the following changes may be made if the source provides written notice to the Department in advance of the change as provided below:

1. Replacing an item of air pollution control equipment listed in the permit with one that is not identical but that is substantially similar and has the same or better pollutant removal efficiency: seven days. The Director may require verification of efficiency of the new equipment by performance tests;

2. A physical change or change in the method of operation that increases actual emissions more than 10% of the major source threshold for any conventional pollutant but does not require a permit revision: seven days;

3. Replacing an item of air pollution control equipment listed in the permit with one that is not substantially similar but that has the same or better efficiency: 30 days. The Director may require verification of efficiency of the new equipment by performance tests;

4. A change that would trigger an applicable requirement that already exists in the permit: 30 days unless otherwise required by the applicable requirement;

5. A change that amounts to reconstruction of the source or an affected facility: seven days. For purposes of this subsection, reconstruction of a source or an affected facility shall be presumed if the fixed capital cost of the new components exceeds 50% of the fixed capital cost of a comparable entirely new source or affected facility and the changes to the components have occurred over the 12 consecutive months beginning with commencement of construction; and

6. A change that will result in the emissions of a new regulated air pollutant above an applicable regulatory threshold but that does not trigger a new applicable requirement for that source category: 30 days. For purposes of this requirement, an applicable regulatory threshold for a conventional air pollutant shall be 10% of the applicable major source threshold for that pollutant.

D. For each change under subsection (C), the written notice shall be by certified mail or hand delivery and shall be received by the Director the minimum amount of time in advance of the change. Notifications of changes associated with emergency conditions, such as malfunctions necessitating the replacement of equipment, may be provided with less than required notice, but must be provided as far in advance of the change, or if advance notification is not practicable, as soon after the change as possible. The written notice shall include:

1. When the proposed change will occur,

2. A description of the change,

3. Any change in emissions of regulated air pollutants, and

4. Any permit term or condition that is no longer applicable as a result of the change.

E. A source may implement any change in subsection (C) without the required notice by applying for a minor permit revision under R18-2-319 and complying with R18-2-319(D)(2) and (G).

F. The permit shield described in R18-2-325 shall not apply to any change made under this Section, other than implementation of an alternate operating scenario under subsection (B)(1).

G. Notwithstanding any other part of this Section, the Director may require a permit to be revised for any change that, when considered together with any other changes submitted by the same source under this Section over the term of the permit, constitutes a change under R18-317.01(A).

H. If a source change is described under both subsections (B) and (C), the source shall comply with subsection (C). If a source change is described under both subsection (C) and R18-2-317.01(B), the source shall comply with R18-2-317.01(B).

I. A copy of all logs required under subsection (B) shall be filed with the Director within 30 days after each anniversary of the permit issue date. If no changes were made at the source requiring logging, a statement to that effect shall be filed instead.

Ariz. Admin. Code § R18-2-317.02

New Section adopted by final rulemaking at 5 A.A.R. 4074, effective September 22, 1999 (Supp. 99-3). Amended by final rulemaking at 18 A.A.R. 1542, effective August 7, 2012 (Supp. 12-2).