Ariz. Admin. Code § 12-15-905

Current through Register Vol. 30, No. 50, December 13, 2024

Section R12-15-905 - Accuracy of Approved Measuring Devices

A. A responsible party shall install, maintain, and use an approved measuring device and method in a manner which will ensure that its measurement error does not exceed 10% of the actual flow rate.

B. All measured systems shall be installed or constructed and thereafter maintained so as to allow the Director, using another measuring device, to check readily the accuracy of the measuring device utilized by the responsible party.

Ariz. Admin. Code § R12-15-905

Adopted effective December 27, 1982 (Supp. 82-6). Former Section R12-15-905 renumbered to R15-15-906, new Section R12-15-905 renumbered from R12-15-904 and amended effective June 15, 1995 (Supp. 95-2).