Current through Register Vol. 30, No. 45, November 8, 2024
Section R11-1-2211 - Personal Protective EquipmentA. Persons handling cyanide salts or solutions during the operation, mixing, maintenance, and leaching procedures shall wear appropriate protective equipment consisting of, but not limited to, eye protection, water-resistant gloves, water- resistant body protection, water-resistant footwear, and a full-face chemical cartridge respirator, with a high efficiency filter, that is used for acid gas and that is approved by the Mine Safety and Health Administration (MSHA) and the National Institute of Occupational Safety and Health (NIOSH) according to the requirements of 30 CFR 11, Subparts A-G and L (10-1-92 edition and no later editions), incorporated herein by reference and on file with the Arizona State Mine Inspector's Office and the Office of the Secretary of State.B. All personal protective equipment shall be washed, cleaned, or replaced after use and otherwise maintained in a safe, usable condition.Ariz. Admin. Code § R11-1-2211
Adopted effective August 2, 1985 (Supp. 85-4). Amended effective July 6, 1993 (Supp. 93-3).