Section 8 AAC 90.137 - Plumber restricted PU certificate of fitness(a) A plumber restricted PU certificate of fitness authorizes the holder of the certificate to install(1) water service piping from the street, right-of-way main, water well, or storage tank to the first stop valve of the serviced structure or other point of use or distribution on the serviced property;(2) building sewer piping from within two feet of a serviced structure to a public sewer, private sewer, private sewage disposal system, or other point of disposal; and(3) building storm drains that receive the discharge of roof drains, leaders, downspouts, or conductors, if the storm drains are installed from within two feet of a commercial structure, or from within two feet of a residential structure of four or more dwelling units, to the street, the right-of-way main line, or a point of disposal approved by the federal, state, or local agency having jurisdiction.(b) A plumber restricted PU certificate of fitness will be issued by the department upon payment of the applicable fees required by AS 18.62.030, if the applicant (1) submits documented proof of experience on a notarized form provided by the department, or by notarized statement on letterhead stationery from employers, that the applicant has worked for at least 1,000 hours installing water, sewer, or storm lines subject to the standards established in AS 18.60.705 and 8 AAC 63.010, and has passed an examination that meets the requirements set out under 8 AAC 90.115; or(2) submits to the department, on a form provided by the department, a sworn affidavit from an official of a union based in the state that demonstrates that the applicant meets the work experience requirements set out under (1) of this subsection, and has passed an examination that meets the requirements set out under 8 AAC 90.115; the affidavit must specify (A) the number of qualifying hours' experience the applicant claims for the classification for which the applicant seeks certification; apprenticeship hours must be noted if apprenticeship hours are being used for qualification;(B) the inclusive dates during which the hours claimed in (A) of this paragraph were worked; and(C) the type of work performed and the name of each contractor for whom the work was performed.(c) An accredited apprenticeship classroom program or educational training in the plumbing field may be substituted for up to 125 hours' work experience in work that is subject to the standards established in AS 18.60.705 and 8 AAC 63.010.Eff. 12/25/98, Register 148; am 9/27/2008, Register 187; am 2/23/2011, Register 197; am 10/28/2023, Register 248, January 2024Authority:AS 18.62.030
AS 18.62.050
AS 18.62.060
AS 18.62.070
AS 23.05.060