Section 5 AAC 39.280 - Identification of stationary fishing gear(a) The owner or operator of a set gillnet or fish wheel in operation shall place in a conspicuous place on or near the set gillnet or fish wheel the name of the fisherman operating it, together with the fisherman's five-digit CFEC permit serial number. Numbers must be at least six inches in height with lines at least one inch wide and of a color contrasting with the background. The identification name and numbers for fish wheels must be placed on the side of the fish wheel facing midstream of the river.(b) In addition to the requirements of (a) of this section, the owner or operator of a set gillnet in operation shall have at each end of the set gillnet a red keg, buoy, or cluster of floats, or, in the case of set gillnets anchored to land, shall have a red keg, buoy, or cluster of floats at the outer end of the net. The kegs, buoys, or clusters of floats must be plainly and legibly marked with the fisherman's five-digit CFEC permit serial number. The kegs, buoys, or clusters of floats may bear only a single number - that of the permit holder operating the gear. In the Upper Subdistrict of the Central District of the Cook Inlet Area, the operator of a set gillnet shall attach to the net a 'trailer' buoy that floats at all times.In effect before 1988; am 7/26/90, Register 115; em am 4/30/91 - 5/30/91, Register 118 [not printed]; am 7/21/91, Register 119; am 4/7/93, Register 126