3 Alaska Admin. Code § 306.645

Current through September 25, 2024
Section 3 AAC 306.645 - Laboratory testing of marijuana and marijuana products
(a) A marijuana testing facility shall use the general body of required laboratory tests as set out in this section for marijuana plant material, an extract or concentrate of marijuana, and a marijuana product. Required tests may include potency analysis, moisture content, foreign matter inspection, microbial screening, pesticide, other chemical residue, and metals screening, and residual solvents levels. A marijuana testing facility shall establish a schedule of fees required for each test it offers, and shall perform tests using methods in compliance with guidelines prescribed by the board.
(b) The tests required for each marijuana type or marijuana product, are as follows:
(1) potency testing is required on marijuana bud and flower, marijuana concentrate, and a marijuana product, as follows:
(A) the required cannabinoid potency test must at least determine the concentration of THC, THCA, CBD, CBDA and CBN cannabinoids; a marijuana testing facility may test and report results for any additional cnmiabinoid if the test is conducted in compliance with a validated method;
(B) a marijuana testing facility shall report potency test results as follows:
(i) for a potency test on marijuana and marijuana concentrate, the marijuana testing facility shall list for each required cannabinoid a single percentage concentration based on dry weight, that represents an average of all samples within the test batch; additionally, total THC and total CBD shall be reported;
(ii) for a potency test on a marijuana product, whether conducted on each individual production lot or using process validation, the marijuana testing facility shall list for each cannabinoid the total number of milligrams contained withing a single retail marijuana product unit for sale;
(iii) for testing whether the THC content is homogenous, the marijuana testing facility shall report the THC content of each single serving in a multi-unit package; the reported content must be within 20 percent of the manufacturer's target; for example, in a 100 milligrams total THC package with 10 servings, each serving must contain between eight and 12 milligrams of THC;
(C) the marijuana testing facility shall determine an edible marijuana product to have failed potency testing if
(i) an individually packaged edible retail marijuana product with 10 servings that is contained within a test lot is determined to have more than 120 milligrams of THC within it; or
(ii) the THC content of an edible marijuana product is not homogenous;
(2) microbial testing for the listed substances on the listed marijuana and marijuana products is required as follows:

Substance

Acceptable Limits Per Gram

Product to be Tested

-Shiga-toxin producing Escherichia coli (STEC)- bacteria

less than 1 colony forming unit (CFU/g)

Marijuana; retail marijuana products; water- and food-based concentrates

Salmonella species - bacteria

less than 1 colony forming unit (CFU/g)

Aspergillus fumigatus, Aspergillus flavus, Aspergillus niger - fungus

less than 1 colony forming unit (CFU/g)

(3) testing for the listed residual solvents and metals on the listed marijuana products is required as follows:

Substance

Acceptable Limits Per Gram

Product to be Tested

butanes

less than 800 porta per million (PPM)

solvent-based concentrates

heptanes

less than 500 parts per million (PPM)

benzene

less than 1 parts per million (PPM

toluene

less than 1 parts per million (PPM)

hexane

less than 10 parts per million (PPM)

Total xylenes (meta-xylenes, para-xylenes, or ortho-xylenes)

less than 1 parts per million (PPM)

3 AAC 306.645

Eff. 2/21/2016, Register 217, April 2016; am 7/5/2017,Register 223, October 2017; am 11/8/2018, Register 228, January 2019 ; am 9/1/2021, Register 239, October 2021

Authority:AS 17.38.010

AS 17.38.070

AS 17.38.121

AS 17.38.150

AS 17.38.190

AS 17.38.200

AS 17.38.900