Section 18 AAC 52.505 - Display of certified station sign(a) Only a station certified under this chapter may display a sign or shield bearing the inscription "Certified I/M Station, Test and Repair." The sign must conform to the design shown in Figure 1 and must be bordered and lettered in light chrome yellow. The background must be royal blue. The word "CERTIFIED" must be in 21/4 inch high gothic letters at the top of the sign. "I/M" must appear where indicated in Figure 1 in four-inch high gothic letters below the word "CERTIFIED". The word "STATION" must appear where indicated in Figure 1 in 21/4 inch high gothic letters below "I/M". The words "TEST AND REPAIR" must appear on two lines at the bottom of the sign in 11/2 inch high gothic letters. All dimensions of the sign may be increased or decreased in uniform proportion. CLICK TO VIEW SIGN
(b) A certified station is not required to display the official I/M shield, but the following terms are reserved and may appear only on an official shield: (1) "certified I/M station";(4) repealed 6/24/94; andEff. 2/1/94, Register 129; am 6/24/94, Register 130Authority:AS 46.03.020(10)
AS 46.14.030
AS 46.14.510