Section 15 AAC 160.410 - Manufacturer distribution(a) A licensed pull-tab manufacturer may distribute only those pull-tabs in this state that the manufacturer designed, constructed, assembled, and packaged.(b) A licensed pull-tab manufacturer may not distribute a pull-tab series in this state to a licensed pull-tab distributor unless the manufacturer has(1) affixed a state identification stamp on the face of the flare card accompanying the series of pull-tabs;(2) included with the pull-tab series the remaining state identification labels from the set for use by the permittee, distributor, or operator, in accordance with other provisions of this chapter; and(3) recorded the state identification number as required under this chapter.(d) A licensed pull-tab manufacturer shall affix a packing slip outside of a shipment of pull-tabs to be shipped in this state. The packing slip must contain (1) the name of the licensed pull-tab manufacturer;(2) the pull-tab serial number;(3) the date of packaging of the series;(4) the name or identification of the person who packaged the shipment; and(5) the state identification number.Eff. 7/30/94, Register 131; am 6/22/2008, Register 186Authority:AS 05.15.060
AS 05.15.181
AS 05.15.185