Section 15 AAC 160.380 - Pull-tab series assembly, packaging, and flare cards(a) A licensed pull-tab manufacturer shall assemble and package a pull-tab series so that a winning pull-tab or the approximate location of a winning pull-tab cannot be determined before the pull-tab has been played by a player.(b) A winning pull-tab must be distributed randomly among all other pull-tabs in its series.(c) A pull-tab series must be packaged and clearly marked on the outside with the name of the licensed pull-tab manufacturer, the pull-tab serial number, and the name of the pull-tab game.(d) If a pull-tab series is packaged in more than one container, the entire series of individual pull-tabs must be thoroughly mixed and distributed evenly among the containers so that a winning pull-tab, the approximate location of a winning pull-tab, or a concentration of winning pull-tabs cannot be determined before the pull-tab has been played by a player.(e) With each pull-tab series, and except as provided in (f) of this section, a pull-tab manufacturer shall include a flare card containing (1) the name or registered trademark of the manufacturer;(2) the name of the pull-tab series;(3) the serial number of the pull-tab series;(4) the number of pull-tabs in the series;(5) the prize structure, including the number of winning pull-tabs in the series for each prize;(6) the winning symbols or numbers for each prize in the series; and(7) the price per pull-tab.(f) A pull-tab manufacturer may have a seal card serve as a flare card in a pull-tab series, if the seal card meets the requirements of (e) of this section, 15 AAC 160.400, and 15 AAC 160.410 for a flare card.Eff. 7/30/94, Register 131; am 6/22/2008, Register 186Authority:AS 05.15.060
AS 05.15.181
AS 05.15.183
AS 05.15.185
AS 05.15.187
AS 05.15.188