Ala. Admin. Code r. 880-X-8I-.20

Current through Register Vol. 43, No. 1, October 31, 2024

Section 880-X-8I-.20 - Additional Cross Sections, Maps, And Plans

(1) The application shall include cross sections, maps, and plans showing--

(a) Elevations and locations of test borings and core samplings;

(b) Elevations and locations of monitoring stations used to gather data for water quality and quantity, fish and wildlife, and air quality, if required, in preparation of the application;

(c) Nature, depth, and thickness of the coal seams to be mined, any coal or rider seams above the seam to be mined, each stratum of the overburden, and the stratum immediately below the lowest coal seam to be mined;

(d) All coal crop lines and the strike and dip of the coal to be mined within the proposed permit area;

(e) Location and extent of subsurface water, if encountered, within the proposed permit or adjacent areas;

(f) Location, and depth if available, of gas and oil wells within the proposed permit area and water wells in the permit area and adjacent area;

(2) The above information may be shown on the permit map(s) required by 880-X-8I-.07.

Author: Randall C. Johnson

Ala. Admin. Code r. 880-X-8I-.20

New Rule: Filed July 27, 1998; effective August 31, 1998; operative January 3, 1999.

On December 4, 1998, the Office of Surface Mining approved this rulemaking adopted by the commission on July 16, 1998. The effective date of this rule will be January 3, 1999.

Statutory Authority:Code of Ala. 1975, § 9-16-71, 73, 74, 75, 80, 81, 82, 83, 84, 85, 86, 88, 90, 92, 96.