Ala. Admin. Code r. 770-X-8-.17

Current through Register Vol. 42, No. 12, September 30, 2024

Section 770-X-8-.17 - Meter Accuracy Requirement

(1) All meters used for measuring quantity of water delivered to a customer shall be in good mechanical condition and shall be adequate in size and design for the type of service which they measure.

(2) Before being installed for the use of any customer, every water meter whether new, repaired or removed from service for any cause shall be adjusted to register within the limits set forth in the following table:

Accurate Limits in Percentages
Meter Type	Maximum Rate	Intermediate Rate	Minimum Rate
			New	Repaired
Displacement	98.5/101.5	98.5/101.5	95/101.5	90/101.5
Current	97/102	None	95/102	90/102
Compound*	97/103	97/103	95/103	90/103

*The minimum required accuracy for compound meters at any rate within the "changeover" range of flows shall be 85%.

(3) Periodic Meter Tests

(a) Unless otherwise authorized by the Commission, a representative sample of 10% of all meters in service shall be periodically inspected and tested by the utility at intervals not exceeding the following schedule:

Size of Meters	Maximum Interval Between Tests
5/8 inch	10 years
3/4 inch	8 years
1 inch	6 years
1 1/2 inch	4 years
2 inch	4 years
3 inch	3 years
4 inch	2 years
6 inch	1 year

(b) Nothing in these rules shall be construed to mean that such periodic tests may not be made more frequently than provided for in the above schedule.

Ala. Admin. Code r. 770-X-8-.17

Effective October 1988. Filed with LRS February 5, 2013. Filed for Codification in the Alabama Administrative Code by the Alabama Public Service Commission on February 5, 2013, pursuant to Code of Ala. 1975, § 41-22-7.

Author: Alabama Public Service Commission

Statutory Authority:Code of Ala. 1975, §§ 37-1-32, 37-1-53.