Ala. Admin. Code r. 480-7-3-.01

Current through Register Vol. 43, No. 1, October 31, 2024

Section 480-7-3-.01 - Installation Of New, Reinstalled, Secondhand, Or Special Design Boilers Or Pressure Vessels

(1) The company or person responsible for the installation of any boiler or pressure vessel shall obtain an installation permit before any installment work is performed. A "Request to Install a Boiler or Pressure Vessel" must be submitted along with the installation permit fee to the Alabama Department of Labor. The Manufacturers Data Report for ASME Code Stamped and National Board Registered Boilers or Pressure Vessels must also accompany the "Request to Install." For boilers or pressure vessels of special design, the "Request to Install" must be accompanied by drawings, calculations, and any other information the chief inspector may require. No boiler or pressure vessel shall be installed in this State unless the boiler or pressure vessel meets all adopted codes, standards, and/or these rules.

(2) All installation permits that have not had any action taken toward installation shall expire twelve (12) months after the issue date. The expiration date shall be shown on the permit. The fee for an expired permit shall be forfeited and the file closed out. The company or person performing the installation must resubmit all information as required in paragraph (1) above in order to obtain a subsequent installation permit.

(3) All installations shall meet the requirements of the Code as defined in these rules.

Ala. Admin. Code r. 480-7-3-.01

New Rule: Filed February 20, 2004; effective March 23, 2004. Amended: Filed January 9, 2013; effective February 13, 2013.

Author: Board of Boilers & Pressure Vessels, Dr. David Dyer, Chairman

Statutory Authority:Code of Ala. 1975, §§ 25-12-4, -6, -14.