Ala. Admin. Code r. 400-5-7-.01

Current through Register Vol. 43, No. 1, October 31, 2024

Section 400-5-7-.01 - Testing Requirements

(1) Utilizing a method approved by the Supervisor, each storage well shall be tested for internal mechanical integrity prior to storing gas. Verification of internal mechanical integrity shall be demonstrated at least every five (5) years thereafter.

(2) Tests for fluid movement along the annular space outside the wellbore shall be conducted when deemed necessary by the Supervisor.

(3) All storage well mechanical integrity tests or verifications shall be prepared and supervised by a qualified engineer or geologist and reports filed with the Board within thirty (30) days.

(4) The operator shall give sufficient notice prior to conducting a mechanical integrity test so the Supervisor may send a duly authorized representative to the location to witness such activity.

Author: State Oil And Gas Board

Ala. Admin. Code r. 400-5-7-.01

New Rule: Filed April 11, 2000; effective May 16, 2000.

Statutory Authority:Code of Ala. 1975, §§ 9-17-1etseq.