Ala. Admin. Code r. 335-7-5-.10

Current through Register Vol. 43, No. 1, October 31, 2024

Section 335-7-5-.10 - Well Construction Information

Drill cuttings from community and NTNC water wells shall be obtained at ten foot intervals and all pronounced changes in formations. Cuttings shall be logged on site or bagged and submitted to a geologist for geologic log interpretations. The following shall be submitted to the Department:

(a) An accurate record of the drill hole diameters and depths,

(b) The assembled order of size and length of casings and liners,

(c) Grouting depths,

(d) Well schematic or diagram and a geologic log which describes and identifies depth and thickness of the formations penetrated,

(e) Static and pumping water levels for projected operation, and

(f) Location of blast shots, test wells, or observation wells.

Author: Joe Alan Power, Edgar K. Hughes

Ala. Admin. Code r. 335-7-5-.10

May 23, 1977. Repealed and Readopted: January 4, 1989; October 31, 1990; effective December 5, 1990. (Rule was renumbered from.09 to.12) Amended: Filed December 21, 1998; effective January 25, 1999. (Rule was renumbered from.12 to.18) Amended: Filed May 2, 2000; effective June 6, 2000. Amended: Filed November 7, 2005; effective December 12, 2005.

Rule 335-7-5-.18 was renumbered to .10 and original Rule 335-7-5-.10, Public Awareness, was repealed as per certification filed November 7, 2005; effective December 12, 2005. See attached history:

History: New Rule: Filed December 21, 1998; effective January 25, 1999. Repealed: Filed November 7, 2005; effective December 12, 2005.

Statutory Authority:Code of Ala. 1975, §§ 22-23-1 through 22-24-12.