Ala. Admin. Code r. 335-7-15-.13

Current through Register Vol. 43, No. 1, October 31, 2024

Section 335-7-15-.13 - Contaminant Source Inventory Development For A Surface Source

Source water protection areas (SWPA) shall be inventoried for known and potential contaminant sources. Information on existing contaminants sources shall be obtained by reviewing records available from Local, State, and Federal permitting and monitoring agencies plus on-site field surveys conducted by water system personnel. Information on non-permitted contaminant sources shall be obtained by on-site field surveys conducted by water system personnel their or designees.

(a) Information on all contaminant sources identified from records and by water systems shall be recorded in tabular form and include:

1. Contaminant source identification.

2. Contaminant source nature, specific contaminate present at the site, and relative amount.

3. Contaminant source location by longitude and latitude as determined by GPS units of activity, such as crops or pasture (animals grazing) can be located by one point indicate most probable entry of runoff to the water source.

4. Name, address, and telephone number of owner or generator of the contaminant source.

5. Name of the regulatory agency that permitted and monitors the contaminant source.

6. Identify contaminant sources as to whether or not they are regulated.

(b) Contaminant sources identified above shall be plotted on an overlay of the watershed map. Contaminant sources associated with large areas of land shall be plotted using GIS information, when available. Otherwise, the approximate area and location shall be shown on the watershed map.

Author: Edgar K. Hughes

Ala. Admin. Code r. 335-7-15-.13

New Rule: Filed November 7, 2005; effective December 12, 2005.

Statutory Authority:Code of Ala. 1975, §§ 22-23-33, 22-23-49, 22-22A-5, 22-22A-6.