All water systems shall determine a lead and copper action level based on the monitoring requirements established in this chapter. A system is considered in compliance if the lead action level is equal to or less than the lead compliance limit (0.015 mg/1) and the copper level is equal to or less than the copper compliance limit (1.3 mg/1). This action level shall be determined using all monitoring at the selected sites, not just the minimum shown in Table 11-1.
Author: Joe Alan Power
Ala. Admin. Code r. 335-7-11-.03
Statutory Authority:Code of Ala. 1975, §§ 22-23-33, 22-22A-5, 22-22A-6.