Ala. Admin. Code r. 335-4-6-.01

Current through Register Vol. 43, No. 1, October 31, 2024

Section 335-4-6-.01 - General Requirements For Processors

(1) A processor shall not store tire materials in excess of the accumulation limit approved by ADEM. If the excess amount has not been eliminated within thirty (30) days of the date the accumulation limit was exceeded, the processor shall notify ADEM as described in 335-4-1-.03 and shall begin to remove the tire materials from the facility to a permitted processor or SWDF.

(2) A processor shall have all necessary processing equipment in operating condition prior to receiving scrap tires for processing. Equipment must be maintained in an operable condition for the duration of the permit. If equipment is inoperable for more than fourteen days, no other comparable equipment is available, and the ability of the facility to continue to process tire materials is interrupted, the facility shall cease receiving tire material until the equipment is repaired.

(3) Processors shall utilize manifests and comply with requirements of 335-4-4-.05 for shipment of tire materials.

(4) Processors are required to maintain financial assurance in accordance with 335-4-8.

(5) Fuel users and processors exempt in 335-4-3-.02 are subject to the requirements for processors in accordance with 335-4-6-.02, 335-4-6-.03, and 335-4-6-.04.

Ala. Admin. Code r. 335-4-6-.01

New Rule: Filed June 30, 2004; effective August 4, 2004.

Amended by Alabama Administrative Monthly Volume XLII, Issue No. 09, June 28, 2024, eff. 8/12/2024.

Author: James L. Bryant. Adam N. Rhodes

Statutory Authority:Code of Alabama 1975, §§ 22-40A-1et seq.