Statutes, codes, and regulations
Alabama Administrative Code
Title 335 - ALABAMA DEPARTMENT OF ENVIRONMENTAL MANAGEMENTLAND DIVISION - HAZARDOUS WASTE PROGRAM
Chapter 335-14-2 - IDENTIFICATION AND LISTING OF HAZARDOUS WASTE
Section 335-14-2-.28 - Subpart BB - Air Emission Standards For Equipment Leaks

Ala. Admin. Code r. 335-14-2-.28

Download
PDF
Current through Register Vol. 43, No. 1, October 31, 2024
Section 335-14-2-.28 - Subpart BB - Air Emission Standards For Equipment Leaks

The Environmental Protection Agency Regulations, as set forth in 40 CFR, Part 261, Subpart BB (as published by EPA on January 13, 2015), are incorporated herein by reference. In the event that any Code of Federal Regulations Rule(s) incorporated herein by reference refers to or cites another Code of Federal Regulations Rule(s), other than 40 CFR Part 261, Subpart BB, such reference to the other Code of Federal Regulations Rule(s) is not incorporated in the ADEM Administrative Code and the ADEM Administrative Code rule specifically addressing said issue or circumstance shall take precedence, be applicable and govern. Any provision of 40 CFR Part 261, Subpart BB, which is inconsistent with the provisions of ADEM Administrative Code, Division 14, is not incorporated herein by reference.

The materials incorporated by reference are available for purchase and inspection at the Department's offices at 1400 Coliseum Boulevard, Montgomery, Alabama 36110-2400.

(1) §261.1050 Applicability (as published by EPA on January 13, 2015).
(2) §261.1051 Definitions (as published by EPA on January 13, 2015).
(3) §261.1052 Standards: Pumps in light liquid service (as published by EPA on January 13, 2015).
(4) §261.1053 Standards: Compressors (as published by EPA on January 13, 2015).
(5) §261.1054 Standards: Pressure relief devices in gas/vapor service (as published by EPA on January 13, 2015).
(6) §261.1055 Standards: Sampling connecting systems (as published by EPA on January 13, 2015).
(7) §261.1056 Standards: Open-ended valves or lines (as published by EPA on January 13, 2015).
(8) §261.1057 Standards: Valves in gas/vapor service or in light liquid service (as published by EPA on January 13, 2015).
(9) §261.1058 Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors (as published by EPA on January 13, 2015).
(10) §261.1059 Standards: Delay of repair (as published by EPA on January 13, 2015).
(11) §261.1060 Standards: Closed-vent systems and control devices (as published by EPA on January 13, 2015).
(12) §261.1061 Alternative standards for valves in gas/vapor service or in light liquid service: percentage of valves allowed to leak (as published by EPA on January 13, 2015).
(13) §261.1062 Alternative standards for valves in gas/vapor service or in light liquid service: skip period leak detection and repair (as published by EPA on January 13, 2015).
(14) §261.1063 Test methods and procedures (as published by EPA on January 13, 2015).
(15) §261.1064 Recordkeeping requirements (as published by EPA on January 13, 2015).
(16) through (31) [Reserved].

Ala. Admin. Code r. 335-14-2-.28

Amended by Alabama Administrative Monthly Volume XXXIV, Issue No. 05, February 29, 2016, eff. 4/8/2016.
Amended by Alabama Administrative Monthly Volume XXXV, Issue No. 05, February 28, 2017, eff. 3/31/2017.
Amended by Alabama Administrative Monthly Volume XLI, Issue No. 07, April 28, 2023, eff. 6/12/2023.

Author: Bradley N. Curvin, Vernon H. Crockett, Jonah L. Harris.

Statutory Authority:Code of Ala. 1975, §§ 22-30-11.