Parts and Accessories Necessary for Safe Operation; Application for an Exemption From Casey's Services Company, USDOT #162449

SUPPLEMENTARY INFORMATION:

I. Public Participation and Request for Comments

A. Submitting Comments

If you submit a comment, please include the docket number for this notice (Docket No. FMCSA-2024-0237), indicate the specific section of this document to which your comment applies, and provide a reason for each suggestion or recommendation. You may submit your comments and material online or by fax, mail, or hand delivery, but please use only one of these means. FMCSA recommends that you include your name and a mailing address, an email address, or a phone number in the body of your document so that FMCSA can contact you if it has questions regarding your submission.

To submit your comment online, go to http://www.regulations.gov/docket/FMCSA-2024-0237/document , click on this notice, click “Comment,” and type your comment into the text box on the following screen.

If you submit your comments by mail or hand delivery, submit them in an unbound format, no larger than 8 1/2 by 11 inches, suitable for copying and electronic filing.

FMCSA will consider all comments and material received during the comment period. Comments received after the comment closing date will be filed in the public docket and will be considered to the extent practicable.

B. Confidential Business Information (CBI)

CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to the notice contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to the notice, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission that constitutes CBI as “PROPIN” to indicate it contains proprietary information. FMCSA will treat such marked submissions as confidential under the Freedom of Information Act, and they will not be placed in the public docket of the notice. Submissions containing CBI should be sent to Brian Dahlin, Chief, Regulatory Evaluation Division, Office of Policy, FMCSA, 1200 New Jersey Avenue SE, Washington, DC 20590-0001 or via email at brian.g.dahlin@dot.gov. At this time, you need not send a duplicate hardcopy of your electronic CBI submissions to FMCSA headquarters. Any comments FMCSA receives not specifically designated as CBI will be placed in the public docket for this notice.

C. Viewing Comments and Documents

To view comments, as well as any documents mentioned in this preamble as being available in the docket, go to https://www.regulations.gov/docket/FMCSA-2024-0237/document and choose the document to review. To view comments, click this notice, then click “Browse Comments.” If you do not have access to the internet, you may view the docket online by visiting Docket Operations on the ground floor of the DOT West Building, 1200 New Jersey Avenue SE, Washington, DC 20590-0001, between 9 a.m. and 5 p.m., ET Monday through Friday, except Federal holidays. To be sure someone is there to help you, please call (202) 366-9317 or (202) 366-9826 before visiting Dockets Operations.

D. Privacy

In accordance with 5 U.S.C. 553(c), DOT solicits comments from the public to better inform its regulatory process. DOT posts these comments, including any personal information the commenter provides, to www.regulations.gov, as described in the system of records notice DOT/ALL 14 (Federal Docket Management System (FDMS)), which can be reviewed under the “Department Wide System of Records Notices” at https://www.transportation.gov/individuals/privacy/privacy-act-system-records-notices. The comments are posted without edit and are searchable by the name of the submitter.

II. Legal Basis

FMCSA has authority under 49 U.S.C. 31136(e) and 31315(b) to grant exemptions from Federal Motor Carrier Safety Regulations (FMCSRs). FMCSA must publish a notice of each exemption request in the Federal Register (49 CFR 381.315(a)). The Agency must provide the public an opportunity to inspect the information relevant to the application, including the applicant's safety analysis. The Agency must provide an opportunity for public comment on the request.

The Agency reviews safety analyses and public comments submitted and determines whether granting the exemption would likely achieve a level of safety equivalent to, or greater than, the level that would be achieved by the current regulation (49 CFR 381.305(a)). The Agency must publish its decision in the Federal Register (49 CFR 381.315(b)). If granted, the notice will identify the regulatory provision from which the applicant will be exempt, the effective period, and all terms and conditions of the exemption (49 CFR 381.315(c)(1)). If the exemption is denied, the notice will explain the reason for the denial (49 CFR 381.315(c)(2)). The exemption may be renewed (49 CFR 381.300(b)).

III. Casey's Request

Casey seeks an exemption from the requirement in 49 CFR 393.25(e) that all exterior lamps (both required lamps and any additional lamps) be steady burning, except for turn signal lamps, hazard warning signal lamps, school bus warning lamps, amber warning lamps or flashing warning lamps on tow trucks and CMVs transporting oversized loads, and warning lamps on emergency and service vehicles authorized by State or local authorities.

Casey asserts that using the Intellistop module, which pulses the rear clearance, identification, and brake lamps from low-level lighting intensity to high-level lighting intensity 4 times in 2 seconds when the brakes are applied rather than providing steady burning lamps during the first 2 seconds, would enhance rear signal systems. Casey submits that pulsing the rear brake lamps of a CMV may significantly increase visibility and reduce the frequency of rear-end crashes, and thus would maintain a level of safety that is equivalent to, or greater than, the level that the CMV would achieve without the requested exemption.

On October 7, 2022, FMCSA denied Intellistop's application for an industry-wide exemption (87 FR 61133) to allow all motor carriers to operate CMVs equipped with Intellistop's module. FMCSA noted that the decision did not preclude individual motor carriers from seeking an exemption from 49 CFR 393.25(e) to purchase, install, and use Intellistop's device subject to terms and conditions to allow sufficient monitoring of the use of the device. Consistent with the October 7, 2022, decision, the Agency seeks public comment on Casey's carrier-specific exemption application.

A copy of Casey's application is included in the docket referenced at the beginning of this notice.

IV. Request for Comments

In accordance with 49 U.S.C. 31315(b), FMCSA requests public comment from all interested persons on Casey's application for a five-year exemption from 49 CFR 393.25(e) to allow the company to operate CMVs equipped with Intellistop's module which pulses the rear clearance, identification and brake lamps from low-level lighting intensity to high-level lighting intensity 4 times in 2 seconds when the brakes are applied.

All comments received before the close of business on the comment closing date will be considered and will be available for examination in the docket at the location listed under the ADDRESSES section of this notice. Comments received after the comment closing date will be filed in the public docket and may be considered to the extent practicable. In addition to late comments, FMCSA will also continue to file, in the public docket, relevant information that becomes available after the comment closing date. Interested persons should continue to examine the public docket for new material.

[FR Doc. 2024-24574 Filed 10-22-24; 8:45 am]

BILLING CODE 4910-EX-P