Mattresses From the Philippines: Final Affirmative Determination of Sales at Less Than Fair Value and Final Affirmative Determination of Critical Circumstances

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The U.S. Department of Commerce (Commerce) determines that mattresses from the Philippines are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is July 1, 2022, through June 30, 2023.

DATES:

Applicable May 15, 2024.

FOR FURTHER INFORMATION CONTACT:

Sun Cho, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-6458.

SUPPLEMENTARY INFORMATION:

Background

On March 1, 2024, Commerce published in the Federal Register its preliminary determination in the LTFV investigation of mattresses from the Philippines and invited interested parties to comment. No interested party submitted comments. Accordingly, the final determination of the LTFV investigation remains unchanged from the Preliminary Determination and no Issues and Decision Memorandum accompanies this notice.

Scope of the Investigation

The products covered by this investigation are mattresses from the Philippines. For a complete description of the scope of this investigation, see the appendix to this notice.

Scope Comments

During the course of this investigation, Commerce received scope comments from parties. Commerce issued a Preliminary Scope Decision Memorandum to address these comments and set aside a period of time for parties to address scope issues in scope-specific case and rebuttal briefs. We received comments from parties on the Preliminary Scope Decision Memorandum, which we address in the Final Scope Decision Memorandum. We made changes to the scope of the investigation from the scope published in the Preliminary Determination, as noted in the appendix to this notice.

Final Affirmative Determination of Critical Circumstances

We continue to find that critical circumstances exist for imports of mattresses from the Philippines for the mandatory respondent Maxiflex Philippines Corp./Polyfoam-RGC International Corporation/Multiflex RNC Philippines, Inc./Multimax Industries Corporation (collectively, Maxiflex et al. )) and for all other producers and exporters pursuant to sections 735(a)(3)(A) and (B) of the Tariff Act of 1930, as amended (the Act), and 19 CFR 351.206.

Use of Adverse Facts Available

As discussed in the Preliminary Determination, we assigned Maxiflex et al. an estimated weighted-average dumping margin based on adverse facts available (AFA), pursuant to sections 776(a) and (b) of Act. There is no new information on the record that would cause us to revisit our decision in the Preliminary Determination. Accordingly, for this final determination, we continue to find that the application of AFA pursuant to sections 776(a) and (b) of the Act is warranted with respect to Maxiflex et al.

All-Others Rate

Section 735(c)(5)(A) of the Act provides that the estimated weighted-average dumping margin for all other producers and exporters not individually investigated shall be equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated excluding rates that are zero, de minimis, or determined entirely under section 776 of the Act.

In the Preliminary Determination, we assigned a dumping margin of 538.23 percent as the all-others rate based on the only calculated rate in the petition, pursuant to section 735(c)(5)(B) of the Act. As noted above, we received no comments on our Preliminary Determination; thus, we continue to assign a dumping margin of 538.23 percent as the all-others rate for this final determination.

Final Determination

The final estimated weighted-average dumping margin is as follows:

Disclosure

Normally, Commerce will disclose to the parties in a proceeding the calculations performed in connection with a final determination within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of this notice of final determination in the Federal Register , in accordance with 19 CFR 351.224(b). However, because Commerce received no comments on the Preliminary Determination, it is adopting the Preliminary Determination as the final determination in this investigation. Consequently, there are no new calculations to disclose.

Continuation of Suspension of Liquidation

In accordance with section 735(c)(4) of the Act, we will instruct U.S. Customs and Border Protection (CBP) to continue to suspend liquidation of subject merchandise, as described in the appendix to this notice, entered, or withdrawn from warehouse, for consumption, on or after December 2, 2023, which is 90 days prior to the date of the date of publication of the affirmative Preliminary Determination in the Federal Register .

Pursuant to section 735(c)(1)(B)(ii) of the Act and 19 CFR 351.210(d), where appropriate, Commerce will instruct CBP to require a cash deposit equal to the estimated weighted-average dumping margin or the estimated all-others rate as follows: (1) the cash deposit rate for the respondent listed above will be equal to the company-specific estimated weighted-average dumping margin determined in this final determination; (2) if the exporter is not a respondent identified above, but the producer is, then the cash deposit rate will be equal to the company-specific estimated weighted-average dumping margin established for that producer of the subject merchandise; and (3) the cash deposit rate for all other producers and exporters will be equal to the all-others estimated weighted-average dumping margin. These suspension of liquidation instructions will remain in effect until further notice.

U.S. International Trade Commission Notification

In accordance with section 735(d) of the Act, we will notify the U.S. International Trade Commission (ITC) of the final affirmative determination of sales at LTFV. Because Commerce's final determination is affirmative, in accordance with section 735(b)(2) of the Act, the ITC will make its final determination as to whether the domestic industry in the United States is materially injured, or threatened with material injury, by reason of imports or sales (or the likelihood of sales) for importation of mattresses from the Philippines no later than 45 days after this final determination. If the ITC determines that such injury does not exist, the proceeding will be terminated, and all cash deposits will be refunded, and suspension of liquidation will be lifted. If the ITC determines that material injury, or the threat of material injury, exists, Commerce will issue an antidumping duty order directing CBP to assess, upon further instruction by Commerce, antidumping duties on all imports of the subject merchandise, entered, or withdrawn from warehouse, for consumption on or after the effective date of the suspension of liquidation, as discussed above in the “Continuation of Suspension of Liquidation” section.

Administrative Protective Order

This notice serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.

Notification to Interested Parties

This determination and this notice are issued and published pursuant to sections 735(d) and 777(i)(1) of the Act, and 19 CFR 351.210(c).

Appendix

Scope of the Investigation

The products covered by this investigation are all types of youth and adult mattresses. The term “mattress” denotes an assembly of materials that at a minimum includes a “core,” which provides the main support system of the mattress, and may consist of innersprings, foam, other resilient filling, or a combination of these materials. Mattresses also may contain: (1) “upholstery,” the material between the core and the top panel of the ticking on a single-sided mattress, or between the core and the top and bottom panel of the ticking on a double-sided mattress; and/or (2) “ticking,” the outermost layer of fabric or other material ( e.g., vinyl) that encloses the core and any upholstery, also known as a cover.

The scope of this investigation is restricted to only “adult mattresses” and “youth mattresses.” “Adult mattresses” are frequently described as “twin,” “extra-long twin,” “full,” “queen,” “king,” or “California king” mattresses. “Youth mattresses” are typically described as “crib,” “toddler,” or “youth” mattresses. All adult and youth mattresses are included regardless of size and size description or how they are described ( e.g., frameless futon mattress and tri-fold mattress).

The scope encompasses all types of “innerspring mattresses,” “non-innerspring mattresses,” and “hybrid mattresses.” “Innerspring mattresses” contain innersprings, a series of metal springs joined together in sizes that correspond to the dimensions of mattresses. Mattresses that contain innersprings are referred to as “innerspring mattresses” or “hybrid mattresses.” “Hybrid mattresses” contain two or more support systems as the core, such as layers of both memory foam and innerspring units.

“Non-innerspring mattresses” are those that do not contain any innerspring units. They are generally produced from foams ( e.g., polyurethane, memory (viscoelastic), latex foam, gel infused viscoelastic (gel foam), thermobonded polyester, polyethylene) or other resilient filling.

Mattresses covered by the scope of this investigation may be imported independently, as part of furniture or furniture mechanisms ( e.g., convertible sofa bed mattresses, sofa bed mattresses imported with sofa bed mechanisms, corner group mattresses, day-bed mattresses, roll-away bed mattresses, high risers, trundle bed mattresses, crib mattresses), or as part of a set (in combination with a “mattress foundation”). “Mattress foundations” are any base or support for a mattress. Mattress foundations are commonly referred to as “foundations,” “boxsprings,” “platforms,” and/or “bases.” Bases can be static, foldable, or adjustable. Only the mattress is covered by the scope if imported as part of furniture, with furniture mechanisms, or as part of a set, in combination with a mattress foundation.

Excluded from the scope of this investigation are “futon” mattresses. A “futon” is a bi-fold frame made of wood, metal, or plastic material, or any combination thereof, that functions as both seating furniture (such as a couch, love seat, or sofa) and a bed. A “futon mattress” is a tufted mattress, where the top covering is secured to the bottom with thread that goes completely through the mattress from the top through to the bottom, and it does not contain innersprings or foam. A futon mattress is both the bed and seating surface for the futon.

Also excluded from the scope are airbeds (including inflatable mattresses) and waterbeds, which consist of air- or liquid-filled bladders as the core or main support system of the mattress.

Also excluded is certain multifunctional furniture that is convertible from seating to sleeping, regardless of filler material or components, where such filler material or components are upholstered, integrated into the design and construction of, and inseparable from, the furniture framing, and the outermost layer of the multifunctional furniture converts into the sleeping surface. Such furniture may, and without limitation, be commonly referred to as “convertible sofas,” “sofabeds,” “sofa chaise sleepers,” “futons,” “ottoman sleepers,” or a like description.

Also excluded from the scope of this investigation are any products covered by the existing antidumping duty orders on uncovered innerspring units from the People's Republic of China, South Africa, and the Socialist Republic of Vietnam. See Uncovered Innerspring Units from the People's Republic of China, South Africa, and Socialist Republic of Vietnam: Continuation of Antidumping Duty Orders,84 FR 55285 (October 16, 2019).

Also excluded from the scope of this investigation are bassinet pads with a nominal length of less than 39 inches, a nominal width of less than 25 inches, and a nominal depth of less than 2 inches.

Additionally, also excluded from the scope of this investigation are “mattress toppers.” A “mattress topper” is a removable bedding accessory that supplements a mattress by providing an additional layer that is placed on top of a mattress. Excluded mattress toppers have a height of four inches or less.

Also excluded from the scope are the following hospital and patient care setting surfaces. Products that fall within the below categories and meet all the exclusion factors in the respective category qualify for such exclusion, regardless of whether they may be referenced as a mattress.

Air Surfaces with all of the following characteristics: with the foot end comprised of either die-cut construction foam or air bladders to allow extension and retraction of the surface; enclosed in a fluid-resistant polyurethane-coated ticking with a zipper; with welded seams on the ticking, which are two or more layers of coated material thermally fused together with a permanent bond; with the core including air bladders, with or without foam inside; with a unique device identifier label for medical devices issued by an FDA-accredited agency and listed in the FDA-administered Global Unique Device Identification Database.

Stretcher Surfaces with all of the following characteristics: with a nominal thickness of 5 inches or less; with the foam core width tapered at one end; enclosed in a fluid-resistant polyurethane-coated ticking with a zipper; with welded seams on the ticking, which are two or more layers of coated material thermally fused together with a permanent bond; with the exterior of the ticking containing a welded flap to cover the ticking zipper; with loop velcro attached to the ticking to allow for the stretcher surface to be firmly affixed to the stretcher; with a unique device identifier label for medical devices issued by an FDA-accredited agency and listed in the FDA-administered Global Unique Device Identification Database.

Birthing Bed Surfaces with all of the following characteristics: with a nominal thickness of 5 inches or less; with a foam core in two pieces that have either a V-shaped cutout or U-Shaped cutout; enclosed in a fluid-resistant polyurethane-coated ticking with a zipper; with welded seams on the ticking, which are two or more layers of coated material thermally fused together with a permanent bond; with attachment fasteners extending from the bottom of the surface comprised of snaps or plastic hook(s); with a unique device identifier label for medical devices issued by an FDA-accredited agency and listed in the FDA-administered Global Unique Device Identification Database.

Foam Surfaces with all the following characteristics: with a nominal thickness of 6.5 inches or less; with a foam core that has articulation lines cut into the foam and/or die-cut construction in a portion of the foam to allow movement of the surface; enclosed in a fluid-resistant polyurethane-coated ticking with a zipper; with the ticking made of material meeting ASTM F1671B-07 requirements for porosity and ISO 10993 requirements for biocompatibility; with welded seams on the ticking, which are two or more layers of coated material thermally fused together with a permanent bond; with brackets or attachment knobs embedded in the surface core to allow the surface to be firmly affixed to the hospital bed frame; with a unique device identifier label for medical devices issued by an FDA-accredited agency and listed in the FDA-administered Global Unique Device Identification Database, where the label includes the manufacturer's name and address as well as the product's name, date of manufacture, serial number, and Global Trade Identification Number (GTIN).

The products subject to this investigation are currently classifiable under Harmonized Tariff Schedule of the United States (HTSUS) subheadings: 9404.21.0010, 9404.21.0013, 9404.21.0095, 9404.29.1005, 9404.29.1013, 9404.29.1095, 9404.29.9085, 9404.29.9087, and 9404.29.9095. Products subject to this investigation may also enter under HTSUS subheadings: 9401.41.0000, 9401.49.0000, and 9401.99.9081. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to this investigation is dispositive.