Large Diameter Welded Pipe From Canada: Final Affirmative Determination of Sales at Less Than Fair Value

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) determines that imports of large diameter welded pipe (welded pipe) from Canada is being, or is likely to be, sold in the United States at less than fair value (LTFV) during the period of investigation (POI) January 1, 2017, through December 31, 2017.

DATES:

Applicable February 27, 2019.

FOR FURTHER INFORMATION CONTACT:

Susan S. Pulongbarit or Annathea Cook, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-4031or (202) 482-0250, respectively.

SUPPLEMENTARY INFORMATION:

Background

On August 27, 2018, Commerce published in the Federal Register the Preliminary Determination of sales at LTFV of welded pipe from Canada, in which we also postponed the final determination until January 9, 2018. We invited interested parties to comment on the Preliminary Determination. A summary of the events that occurred since Commerce published the Preliminary Determination, as well as a full discussion of the issues raised by parties for this final determination, may be found in the Issues and Decision Memorandum, which is adopted by this notice.

Commerce exercised its discretion to toll all deadlines affected by the partial federal government closure from December 22, 2018, through the resumption of operations on January 29, 2019. If the tolled deadline falls on a non-business day, in accordance with Commerce's practice, the deadline will become the next business day. The revised deadline for this final determination is now February 19, 2019.

Scope of the Investigation

The product covered by this investigation is welded pipe from Canada. For a full description of the scope of this investigation, see the “Scope of the Investigation” in Appendix I of this notice.

Scope Comments

During the course of this investigation and the concurrent LTFV investigations of welded pipe from Greece, India, the People's Republic of China (China) and the Republic of Turkey (Turkey), and the concurrent countervailing duty investigations of large diameter welded pipe from China, India, Korea and Turkey, Commerce received scope comments from interested parties. Commerce issued a Preliminary Scope Decision Memorandum to address these comments. In the Preliminary Determination, Commerce set aside a period of time for parties to address scope issues in scope case and rebuttal briefs. No interested parties submitted scope comments in scope case or scope rebuttal briefs. Therefore, for this final determination, the scope of this investigation remains unchanged from that published in the Preliminary Determination.

Analysis of Comments Received

All issues raised in the case and rebuttal briefs submitted by parties in this investigation are addressed in the Issues and Decision Memorandum accompanying this notice. A list of the issues addressed in the Issues and Decision Memorandum is attached to this notice as Appendix II. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov,, and it is available to all parties in the Central Records Unit, room B-8024 of the main Department of Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/index.html. The signed and electronic versions of the Issues and Decision Memorandum are identical in content.

Verification

As provided in section 782(i) of the Tariff Act of 1930, as amended, (the Act) from September to December 2018, we conducted verification of the sales and cost information submitted by Evraz Inc. NA (Evraz) and Enbridge Inc. (Enbridge) for use in our final determination. We used standard verification procedures, including an examination of relevant accounting and production records, and original source documents provided by Evraz and Enbridge.

Changes Since the Preliminary Determination

Based on our analysis of the comments received and our findings at verification, we made certain changes to the margin calculations for the respondent. For a discussion of these changes, see the “Margin Calculations” section of the Issues and Decision Memorandum.

All-Others Rate

Section 735(c)(5)(A) of the Act provides that the estimated weighted-average dumping margin for all-other producers and exporters not individually investigated shall be equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated excluding rates that are zero, de minimis, or determined entirely under section 776 of the Act. Evraz is the only respondent for which Commerce calculated an estimated weighted-average dumping margin that is not zero, de minimis, or based entirely on facts otherwise available. Therefore, for purposes of determining the “all-others” rate, and pursuant to section 735(c)(5)(A) of the Act, we are using the estimated weighted-average dumping margin calculated for Evraz, as referenced in the “Final Determination” section below.

Final Determination

The final estimated weighted-average dumping margins are as follows:

Disclosure

We intend to disclose the calculations performed in this final determination within five days of the date of publication of this notice to parties in this proceeding in accordance with 19 CFR 351.224(b).

Continuation of Suspension of Liquidation

In accordance with section 735(c)(1)(B) of the Act, for this final determination, we will direct U.S. Customs and Border Protection (CBP) to continue to suspend liquidation of all entries of welded pipe from Canada, as described in Appendix I of this notice, which are entered, or withdrawn from warehouse, for consumption on or after August 27, 2018, the date of publication in the Federal Register of the affirmative Preliminary Determination.

Pursuant to section 735(c)(1)(B)(ii) of the Act and 19 CFR 351.210(d), we will instruct CBP to require a cash deposit for such entries of merchandise equal to the estimated weighted-average dumping margin as follows: (1) The cash deposit rate for a company listed above will be equal to the respondent-specific estimated weighted-average dumping margin determined in this final determination; (2) if the exporter is not a respondent identified above but the producer is, then the cash deposit rate will be equal to the respondent-specific estimated weighted-average dumping margin established for that producer of the subject merchandise; and (3) the cash deposit rate for all other producers and exporters will be equal to the all-others estimated weighted-average dumping margin. These suspension of liquidation instructions will remain in effect until further notice.

International Trade Commission Notification

In accordance with section 735(d) of the Act, we will notify the International Trade Commission (ITC) of the final affirmative determination of sales at LTFV. In addition, we are making available to the ITC all non-privileged and non-proprietary information related to this investigation. We will allow the ITC access to all privileged and business proprietary information in our files, provided the ITC confirms that it will not disclose such information, either publicly or under an administrative protective order (APO), without the written consent of the Assistant Secretary for Enforcement and Compliance. Because Commerce's final determination is affirmative, in accordance with section 735(b)(2) of the Act, the ITC will make its final determination as to whether the domestic industry in the United States is materially injured, or threatened with material injury, by reason of imports, or sales (or the likelihood of sales) for importation of welded pipe from Canada no later than 45 days after this final determination. If the ITC determines that such injury does not exist, this proceeding will be terminated and all cash deposits will be refunded. If the ITC determines that such injury does exist, Commerce will issue an antidumping duty order directing CBP to assess, upon further instruction by Commerce, antidumping duties on all imports of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the effective date of the suspension of liquidation, as discussed above in the “Continuation of Suspension of Liquidation” section.

Notification Regarding Administrative Protective Orders

This notice serves as a reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

Notification to Interested Parties

This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

Appendix I

Scope of the Investigation

The merchandise covered by this investigation is welded carbon and alloy steel pipe (including stainless steel pipe), more than 406.4 mm (16 inches) in nominal outside diameter (large diameter welded pipe), regardless of wall thickness, length, surface finish, grade, end finish, or stenciling. Large diameter welded pipe may be used to transport oil, gas, slurry, steam, or other fluids, liquids, or gases. It may also be used for structural purposes, including, but not limited to, piling. Specifically, not included is large diameter welded pipe produced only to specifications of the American Water Works Association (AWWA) for water and sewage pipe.

Large diameter welded pipe used to transport oil, gas, or natural gas liquids is normally produced to the American Petroleum Institute (API) specification 5L. Large diameter welded pipe may also be produced to American Society for Testing and Materials (ASTM) standards A500, A252, or A53, or other relevant domestic specifications, grades and/or standards. Large diameter welded pipe can be produced to comparable foreign specifications, grades and/or standards or to proprietary specifications, grades and/or standards, or can be non-graded material. All pipe meeting the physical description set forth above is covered by the scope of this investigation, whether or not produced according to a particular standard.

Subject merchandise also includes large diameter welded pipe that has been further processed in a third country, including but not limited to coating, painting, notching, beveling, cutting, punching, welding, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in-scope large diameter welded pipe.

The large diameter welded pipe that is subject to this investigation is currently classifiable in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 7305.11.1030, 7305.11.1060, 7305.11.5000, 7305.12.1030, 7305.12.1060, 7305.12.5000, 7305.19.1030, 7305.19.1060, 7305.19.5000, 7305.31.4000, 7305.31.6010, 7305.31.6090, 7305.39.1000 and 7305.39.5000. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Scope of the Investigation

IV. Margin Calculations

V. Discussion of the Issues

Comment 1: Evraz and Enbridge Affiliation

Comment 2: Enbridge's U.S. Sales

Comment 3: Freight Revenue

Comment 4: Startup Adjustment

Comment 5: Cost of Downgraded Pipe

Comment 6: Parent Holding Company G&A Expenses

Comment 7: Major Input

Comment 8: Impairment Loss

VI. Recommendation