Countervailing Duty Investigation of Certain Corrosion-Resistant Steel Products From the People's Republic of China: Preliminary Affirmative Determination

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (the Department) preliminarily determines that countervailable subsidies are being provided to producers and exporters of certain corrosion-resistant steel products (corrosion-resistant steel) from the People's Republic of China (PRC). The period of investigation is January 1, 2014, through December 31, 2014. We invite interested parties to comment on this preliminary determination.

DATES:

Effective date: November 6, 2015.

FOR FURTHER INFORMATION CONTACT:

Emily Halle, David Lindgren, or Spencer Toubia, AD/CVD Operations, Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone (202) 482-0176, (202) 482-3870, or (202) 482-0123, respectively.

SUPPLEMENTARY INFORMATION:

Scope of the Investigation

The products covered by this investigation are corrosion-resistant steel products from the PRC. For a complete description of the scope of this investigation, see Appendix II.

Methodology

The Department is conducting this countervailing duty (CVD) investigation in accordance with section 701 of the Tariff Act of 1930, as amended (the Act). For each of the subsidy programs found countervailable, we preliminarily determine that there is a subsidy, i.e., a financial contribution by an “authority” that gives rise to a benefit to the recipient, and that the subsidy is specific. For a full description of the methodology underlying our preliminary conclusions, see the Preliminary Decision Memorandum. A list of topics discussed in the Preliminary Decision Memorandum is included as Appendix I to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov , and is available to all parties in the Central Records Unit, room B8024 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/ . The signed Preliminary Decision Memorandum and the electronic version are identical in content.

The Department notes that, in making these findings, we relied, in part, on facts available and, because we find that one or more respondents did not act to the best of their ability to respond to the Department's requests for information, we drew an adverse inference where appropriate in selecting from among the facts otherwise available. For further information, see “Use of Facts Otherwise Available and Adverse Inferences” in the Preliminary Decision Memorandum.

Preliminary Determination and Suspension of Liquidation

In accordance with section 703(d)(1)(A)(i) of the Act, we calculated an individual estimated countervailable subsidy rate for YPC. Additionally, in accordance with sections 703(d) and 705(c)(5)(A) of the Act, for companies not individually investigated, we apply an “all-others” rate, which is normally calculated by weight averaging the subsidy rates of the companies selected for individual investigation by those companies' exports of the subject merchandise to the United States. However, under section 705(c)(5)(A)(i) of the Act, the all-others rate excludes zero and de minimis rates calculated for the exporters and producers individually investigated as well as rates based entirely on facts otherwise available. Therefore, we have excluded the rates based entirely on facts otherwise available assigned to Angang Group Hong Kong Company Ltd. (Angang), Baoshan Iron & Steel Co., Ltd. (Baoshan), Duferco S.A. (Duferco), Changshu Everbright Material Technology (Everbright), and Handan Iron & Steel Group (Handan) from the all-others rate. Because the only individually calculated rate that is not zero, de minimis, or based on facts otherwise available is the rate calculated for YPC, in accordance with section 705(c)(5)(A)(i) of the Act, the rate calculated for YPC is preliminarily assigned as the “all-others” rate. The preliminary estimated countervailable subsidy rates are summarized in the table below.

In accordance with section 703(d)(2) of the Act, we will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of all entries of corrosion-resistant steel from the PRC as described in the “Scope of the Investigation” entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register. Pursuant to 19 CFR 351.205(d), the Department will instruct CBP to require a cash deposit equal to the rests indicated above. Section 703(e)(2) of the Act provides that, given an affirmative determination of critical circumstances, any suspension of liquidation shall apply to unliquidated entries of merchandise entered, or withdrawn from warehouse, for consumption on or after the later of (a) the date which is 90 days before the date on which the suspension of liquidation was first ordered, or (b) the date on which notice of initiation of the investigation was published. On October 29, 2015, we preliminarily found that critical circumstances exist for imports produced or exported by Angang, Baoshan, Duferco, Everbright, and Handan. Accordingly, for these companies, in accordance with section 703(e)(2)(A) of the Act, suspension of liquidation of corrosion-resistant steel from the PRC, as described in the “Scope of the Investigation,” shall apply to unliquidated entries of merchandise entered, or withdrawn from warehouse, for consumption on or after the date which is 90 days before the publication of this notice, the date suspension of liquidation is first ordered. Because we find critical circumstances do not exist for YPC and for all-other producers and exporters, we will begin suspension of liquidation for such firms on the date of publication of this notice in the Federal Register.

Verification

As provided in section 782(i)(1) of the Act, we intend to verify the information submitted by the respondents prior to making our final determination.

International Trade Commission Notification

In accordance with section 703(f) of the Act, we will notify the International Trade Commission (ITC) of our determination. In addition, we are making available to the ITC all non-privileged and non-proprietary information relating to this investigation. We will allow the ITC access to all privileged and business proprietary information in our files, provided the ITC confirms that it will not disclose such information, either publicly or under an administrative protective order, without the written consent of the Assistant Secretary for Enforcement and Compliance.

In accordance with section 705(b)(2) of the Act, if our final determination is affirmative, the ITC will make its final determination within 45 days after the Department makes its final determination.

Disclosure and Public Comment

The Department intends to disclose to interested parties the calculations performed in connection with this preliminary determination within five days of its public announcement. Interested parties may submit case and rebuttal briefs, as well as request a hearing. For a schedule of the deadlines for filing case briefs, rebuttal briefs, and hearing requests, see the Preliminary Decision Memorandum.

This determination is issued and published pursuant to sections 703(f) and 777(i) of the Act and 19 CFR 351.205(c).

Appendix I—List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Scope Comments

IV. Scope of the Investigation

V. Preliminary Determination of Critical Circumstances

VI. Injury Test

VII. Application of the CVD Law to Imports from the PRC

VIII. Use of Facts Otherwise Available and Adverse Inferences

IX. Subsidies Valuation

X. Benchmarks and Discount Rates

XI. Analysis of Programs

XII. Disclosure and Public Comment

XIII. Conclusion

Appendix II—Scope of the Investigation

The products covered by this investigation are certain flat-rolled steel products, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based alloys, whether or not corrugated or painted, varnished, laminated, or coated with plastics or other non-metallic substances in addition to the metallic coating. The products covered include coils that have a width of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been “worked after rolling” (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above:

(1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and

(2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non-rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies.

Steel products included in the scope of this investigation are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

• 2.50 percent of manganese, or
• 3.30 percent of silicon, or
• 1.50 percent of copper, or
• 1.50 percent of aluminum, or
• 1.25 percent of chromium, or
• 0.30 percent of cobalt, or
• 0.40 percent of lead, or
• 2.00 percent of nickel, or
• 0.30 percent of tungsten (also called wolfram), or
• 0.80 percent of molybdenum, or
• 0.10 percent of niobium (also called columbium), or
• 0.30 percent of vanadium, or
• 0.30 percent of zirconium

Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium.

For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels and high strength low alloy (HSLA) steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum.

Furthermore, this scope also includes Advanced High Strength Steels (AHSS) and Ultra High Strength Steels (UHSS), both of which are considered high tensile strength and high elongation steels.

All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this investigation unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of this investigation:

• Flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead (“terne plate”), or both chromium and chromium oxides (“tin free steel”), whether or not painted, varnished or coated with plastics or other non-metallic substances in addition to the metallic coating;
• Clad products in straight lengths of 4.7625 mm or more in composite thickness and of a width which exceeds 150 mm and measures at least twice the thickness; and
• Certain clad stainless flat-rolled products, which are three-layered corrosion-resistant flat-rolled steel products less than 4.75 mm in composite thickness that consist of a flat-rolled steel product clad on both sides with stainless steel in a 20%-60%-20% ratio.

The products subject to the investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7210.30.0030, 7210.30.0060, 7210.41.0000, 7210.49.0030, 7210.49.0091, 7210.49.0095, 7210.61.0000, 7210.69.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.6000, 7210.90.9000, 7212.20.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, and 7212.60.0000.

The products subject to the investigation may also enter under the following HTSUS item numbers: 7210.90.1000, 7215.90.1000, 7215.90.3000, 7215.90.5000, 7217.20.1500, 7217.30.1530, 7217.30.1560, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.91.0000, 7225.92.0000, 7225.99.0090, 7226.99.0110, 7226.99.0130, 7226.99.0180, 7228.60.6000, 7228.60.8000, and 7229.90.1000.

The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigation is dispositive.