Common Alloy Aluminum Sheet From the People's Republic of China: Continuation of Antidumping and Countervailing Duty Orders

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that the revocation of the antidumping duty (AD) and countervailing duty (CVD) orders on certain common alloy aluminum sheet (CAAS) from the People's Republic of China (China) would likely lead to the continuation or recurrence of dumping and countervailable subsidies, and material injury to an industry in the United States, Commerce is publishing a notice of continuation of the AD and CVD orders.

DATES:

Applicable August 28, 2024.

SUPPLEMENTARY INFORMATION:

Background

On February 6 and 8, 2019, respectively, Commerce published in the Federal Register the CVD and AD orders on CAAS from China. On January 2, 2024, the ITC instituted, and Commerce initiated, the first sunset review of the Orders, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of its reviews, Commerce determined that revocation of the Orders would likely lead to the continuation or recurrence of dumping and countervailable subsidies, and therefore, notified the ITC of the magnitude of the margins of dumping and subsidy rates likely to prevail should the Orders be revoked.

On August 28, 2024, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.

Scope of the Orders

The merchandise covered by these Orders is aluminum common alloy sheet (common alloy sheet), which is a flat-rolled aluminum product having a thickness of 6.3 mm or less, but greater than 0.2 mm, in coils or cut-to-length, regardless of width. Common alloy sheet within the scope of these Orders includes both not clad aluminum sheet, as well as multi-alloy, clad aluminum sheet. With respect to not clad aluminum sheet, common alloy sheet is manufactured from a 1XXX-, 3XXX-, or 5XXX-series alloy as designated by the Aluminum Association. With respect to multi-alloy, clad aluminum sheet, common alloy sheet is produced from a 3XXX-series core, to which cladding layers are applied to either one or both sides of the core.

Common alloy sheet may be made to ASTM specification B209-14, but can also be made to other specifications. Regardless of specification, however, all common alloy sheet meeting the scope description is included in the scope. Subject merchandise includes common alloy sheet that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the Orders if performed in the country of manufacture of the common alloy sheet.

Excluded from the scope of these Orders is aluminum can stock, which is suitable for use in the manufacture of aluminum beverage cans, lids of such cans, or tabs used to open such cans. Aluminum can stock is produced to gauges that range from 0.200 mm to 0.292 mm, and has an H-19, H-41, H-48, or H-391 temper. In addition, aluminum can stock has a lubricant applied to the flat surfaces of the can stock to facilitate its movement through machines used in the manufacture of beverage cans. Aluminum can stock is properly classified under Harmonized Tariff Schedule of the United States (HTSUS) subheadings 7606.12.3045 and 7606.12.3055. Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set for the above.

Common alloy sheet is currently classifiable under HTSUS subheadings 7606.11.3060, 7606.11.6000, 7606.12.3090, 7606.12.6000, 7606.91.3090, 7606.91.6080, 7606.92.3090, and 7606.92.6080. Further, merchandise that falls within the scope of these Orders may also be entered into the United States under HTSUS subheadings 7606.11.3030, 7606.12.3030, 7606.91.3060, 7606.91.6040, 7606.92.3060, 7606.92.6040, 7607.11.9090. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of these Orders is dispositive.

Continuation of the Orders

As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to continuation or recurrence of dumping and countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise.

The effective date of the continuation of the Orders will be August 28, 2024. Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year reviews of the Orders not later than 30 days prior to fifth anniversary of the date of the last determination by the ITC.

Administrative Protective Order (APO)

This notice also serves as a final reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.

Notification to Interested Parties

These five-year (sunset) reviews and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and published in accordance with section 777(i) of the Act, and 19 CFR 351.218(f)(4).

[FR Doc. 2024-19942 Filed 9-5-24; 8:45 am]

BILLING CODE 3510-DS-P