Certain Per- and Polyfluoroalkyl Substances (PFAS) Risk Management Under the Toxic Substances Control Act (TSCA); Request for Comment

Download PDF
Federal RegisterSep 30, 2024
89 Fed. Reg. 79581 (Sep. 30, 2024)
Document Headings

Document headings vary by document type but may contain the following:

  • the agency or agencies that issued and signed a document
  • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to
  • the agency docket number / agency internal file number
  • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions
  • See the Document Drafting Handbook for more details.

    Environmental Protection Agency
  • [EPA-HQ-OPPT-2024-0131; FRL-12261-01-OCSPP]
  • AGENCY:

    Environmental Protection Agency (EPA).

    ACTION:

    Notice.

    SUMMARY:

    The Environmental Protection Agency (EPA or Agency) is seeking public comment on the manufacture of certain per- and polyfluoroalkyl substances (PFAS), including perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), and perfluorodecanoic acid (PFDA), during the fluorination of high-density polyethylene (HDPE) and other plastic containers to inform regulations as appropriate under the Toxic Substances Control Act (TSCA). This request for public comment follows the Agency's grant on July 10, 2024, of a TSCA petition received on April 11, 2024, which requested that EPA address via TSCA the regulation of PFOA, PFNA, and PFDA formed during the fluorination of plastic containers used for a variety of household consumer, pesticide, fuel, automotive, and other industrial products.

    DATES:

    Comments must be received on or before November 29, 2024.

    ADDRESSES:

    Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2024-0131, online at https://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Additional instructions on commenting and visiting the docket, along with more information about dockets generally, is available at https://www.epa.gov/dockets.

    FOR FURTHER INFORMATION CONTACT:

    Technical information: Thomas Groeneveld, Existing Chemical Risk Management Division (7404M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 566-1188; email address: groeneveld.thomas@epa.gov.

    General information: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: TSCA-Hotline@epa.gov.

    SUPPLEMENTARY INFORMATION:

    I. Executive Summary

    A. Does this action apply to me?

    This action is directed to the public in general and may be of particular interest to those involved in the manufacture, processing, distribution, use, and disposal of PFAS, including PFOA, PFNA, and PFDA, formed during the fluorination of plastic containers, related industry trade organizations, non-governmental organizations with an interest in human and environmental health, state and local governments, Tribal Nations, and/or those interested in the assessment or management of risks involving chemical substances and mixtures regulated under TSCA. As such, the Agency has not attempted to describe all the specific entities that this action might apply to. If you need help determining applicability, consult the technical contact listed under FOR FURTHER INFORMATION CONTACT .

    B. What is the Agency's authority for taking this action?

    Under TSCA section 6(a), if EPA determines that the manufacture, processing, distribution in commerce, use, or disposal of a chemical substance or mixture, or that any combination of such activities, presents an unreasonable risk of injury to health or the environment, EPA conducts a rulemaking to apply one or more of the TSCA section 6(a) requirements to the extent necessary so that the chemical substance or mixture no longer presents such risk. In proposing and promulgating rules under TSCA section 6(a), EPA considers, among other things, the provisions of TSCA sections 6(c)(2), 6(d), 6(g), and 9. In addition, to the extent that EPA makes a decision based on science, TSCA section 26(h) requires EPA, in carrying out TSCA sections 4, 5, and 6, to use “scientific information, technical procedures, measures, methods, protocols, methodologies, or models, employed in a manner consistent with the best available science,” while also taking into account other considerations, including the relevance of information and any uncertainties. TSCA section 26(i) requires that decisions under TSCA sections 4, 5, and 6 be “based on the weight of the scientific evidence.” TSCA section 26(k) requires that EPA consider information that is reasonably available in carrying out TSCA sections 4, 5, and 6.

    C. What action is the Agency taking?

    On April 11, 2024, the Center for Environmental Health, Public Employees for Environmental Responsibility, Alaska Community Action on Toxics, Clean Cape Fear, Clean Water Action, Delaware Riverkeeper and Merrimack Citizens for Clean Water submitted a petition under TSCA section 21 requesting that EPA establish regulations under TSCA section 6 prohibiting the manufacturing, processing, use, distribution in commerce and disposal of PFOA, PFNA and PFDA formed during the fluorination of plastic containers. On July 10, 2024, EPA granted this petition. TSCA section 21(b)(3) requires EPA to “promptly commence an appropriate proceeding” following the grant of a petition.

    EPA has identified information necessary to inform the Agency's path forward with respect to regulation of these PFAS formed during the fluorination of plastic containers under TSCA section 6 and is issuing this notice to collect such information. EPA is seeking public comment and information regarding the number, location, and uses of fluorinated containers in the United States, including any uses critical to the national economy, national security, or critical infrastructure (which may include uses in medical devices); alternatives to the fluorination process that generates PFAS including PFOA, PFNA, and PFDA; and measures to address risk from PFOA, PFNA, and PFDA formed during the fluorination of plastic containers. As discussed above, in carrying out section 6 of TSCA, EPA considers the provisions of TSCA sections 6(c)(2), 6(d), and 6(g). The information requested in this notice will inform EPA's considerations of these provisions. For example, information about alternative fluorination processes is necessary for EPA to consider the availability of technically and economically feasible alternatives that benefit health or the environment, as required under TSCA section 6(c)(2)(C). Similarly, consistent with TSCA section 6(d), EPA is seeking input about the availability of alternatives and the number, location, and uses of fluorinated containers to inform its consideration of compliance dates regulation as appropriate under TSCA. Further, information about the uses of fluorinated containers, alternatives to the fluorination process, and measures to address risk from PFAS formed during the fluorination of plastic containers will inform EPA's consideration of exemptions from regulation and conditions on such exemptions, as outlined in TSCA section 6(g).

    D. What should I consider as I prepare my comments?

    1. Submitting CBI.

    Do not submit CBI to EPA through https://www.regulations.gov or email. If you wish to include CBI in your comment, please follow the applicable instructions at https://www.epa.gov/dockets/commenting-epa-dockets#rules and clearly mark the information that you claim to be CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR parts 2 and 703, as applicable.

    2. Tips for preparing your comments.

    When preparing and submitting your comments, see the commenting tips at https://www.epa.gov/dockets/commenting-epa-dockets.

    II. Request for Comment

    EPA seeks information on the manufacture of PFAS including PFOA, PFNA, and PFDA during the fluorination of HDPE and other plastic containers. Input on the following is of particular interest to EPA:

    • Number, location, and uses of fluorinated containers in the United States, including any uses critical to the national economy, national security, or critical infrastructure (which may include uses in medical devices);
    • Alternatives to the fluorination process that generates PFAS including PFOA, PFNA, and PFDA; and
    • easures to address risk from PFOA, PFNA, and PFDA formed during the fluorination of plastic containers.

    To the extent possible, the Agency asks commenters to please cite and provide any public data related to or that supports comments provided, and to the extent permissible, describe and provide any supporting data that is not publicly available.

    Authority: 15 U.S.C. 2605.

    Dated: September 24, 2024.

    Michal Freedhoff,

    Assistant Administrator, Office of Chemical Safety and Pollution Prevention.

    [FR Doc. 2024-22330 Filed 9-27-24; 8:45 am]

    BILLING CODE 6560-50-P