Document headings vary by document type but may contain the following:
See the Document Drafting Handbook for more details.
AGENCY:
Environmental Protection Agency (EPA).
ACTION:
Notice.
SUMMARY:
EPA is required under the Toxic Substances Control Act (TSCA), as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act, to make information publicly available and to publish information in the Federal Register pertaining to submissions under TSCA section 5, including notice of receipt of a Premanufacture notice (PMN), Significant New Use Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including an amended notice or test information; an exemption application (Biotech exemption); an application for a test marketing exemption (TME), both pending and/or concluded; a notice of commencement (NOC) of manufacture (including import) for new chemical substances; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. This document covers the period from 8/01/2024 to 8/31/2024.
DATES:
Comments identified by the specific case number provided in this document must be received on or before October 21, 2024.
ADDRESSES:
Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2024-0057, through the Federal eRulemaking Portal at https://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Additional instructions on commenting and visiting the docket, along with more information about dockets generally, is available at https://www.epa.gov/.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Project Management and Operations Division (MC 7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the period from 8/01/2024 to 8/31/2024. The Agency is providing notice of receipt of PMNs, SNUNs, and MCANs (including amended notices and test information); an exemption application under 40 CFR part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs to manufacture a new chemical substance; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review.
EPA is also providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et seq., a chemical substance may be either an “existing” chemical substance or a “new” chemical substance. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a “new chemical substance,” while a chemical substance that is listed on the TSCA Inventory is classified as an “existing chemical substance.” (See TSCA section 3(11).) For more information about the TSCA Inventory please go to: https://www.epa.gov/inventory.
Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN, or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for “test marketing” purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: https://www.epa.gov/under-tsca.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to publish in the Federal Register certain information, including notice of receipt of a PMN/SNUN/MCAN (including amended notices and test information); an exemption application under 40 CFR part 725 (biotech exemption); an application for a TME, both pending and concluded; NOCs to manufacture a new chemical substance; and a periodic status report on the new chemical substances that are currently under EPA review or have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in general.
D. Does this action have any incremental economic impacts or paperwork burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at https://www.epa.gov/dockets/commenting-epa-dockets.
II. Status Reports
In the past, EPA has published individual notices reflecting the status of TSCA section 5 filings received, pending, or concluded. In 1995, the Agency modified its approach and streamlined the information published in the Federal Register after providing notice of such changes to the public and an opportunity to comment (see the Federal Register of May 12, 1995 (60 FR 25798) (FRL-4942-7)). Since the passage of the Lautenberg amendments to TSCA in 2016, public interest in information on the status of section 5 cases under EPA review and, in particular, the final determination of such cases, has increased. In an effort to be responsive to the regulated community, the users of this information, and the general public, to comply with the requirements of TSCA, to conserve EPA resources and to streamline the process and make it more timely, EPA is providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA during this period, table I provides the following information (to the extent that such information is not subject to a CBI claim) on the notices screened by EPA during this period: The EPA case number assigned to the notice that indicates whether the submission is an initial submission, or an amendment, a notation of which version was received, the date the notice was received by EPA, the submitting manufacturer ( i.e., domestic producer or importer), the potential uses identified by the manufacturer in the notice, and the chemical substance identity.
As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that this information in the table is generic information because the specific information provided by the submitter was claimed as CBI. Submissions which are initial submissions will not have a letter following the case number. Submissions which are amendments to previous submissions will have a case number followed by the letter “A” ( e.g., P-18-1234A). The version column designates submissions in sequence as “1”, “2”, “3”, etc. Note that in some cases, an initial submission is not numbered as version 1; this is because earlier version(s) were rejected as incomplete or invalid submissions. Note also that future versions of the following tables may adjust slightly as the Agency works to automate population of the data in the tables.
Table I—PMN/SNUN/MCANs Approved * From 8/01/2024 to 8/31/2024
Case No. | Version | Received date | Manufacturer | Use | Chemical substance |
---|---|---|---|---|---|
J-24-0020A | 2 | 05/21/2024 | Danisco US, Inc | (G) Production of a chemical substance | (G) Genetically modified microorganism for the production of a chemical substance. |
J-24-0020A | 4 | 08/15/2024 | Danisco US, Inc | (G) Production of a chemical substance | (G) Genetically modified microorganism for the production of a chemical substance. |
J-24-0020A | 5 | 08/20/2024 | Danisco US, Inc | (G) Production of a chemical substance | (G) Genetically modified microorganism for the production of a chemical substance. |
P-20-0003A | 6 | 08/27/2024 | CBI | (S) Photoinitiator for printing (UV, LED, flexo, screen and inkjet ink) | (S) 2H-1-Benzopyran-2-one, 5,7-dimethoxy-, 3-(4-C10-13-sec-alkylbenzoyl) derivs. |
P-22-0071A | 6 | 08/22/2024 | CBI | (G) Industrial Surfactant | (S) D-Glucopyranose, oligomeric, maleates, C9-11-alkyl glycosides, sulfonated, potassium salts. |
P-22-0072A | 6 | 08/22/2024 | CBI | (G) Industrial Surfactant | (S) D-Glucopyranose, oligomeric, maleates, decyl octyl glycosides, sulfonated, potassium salts. |
P-22-0073A | 6 | 08/22/2024 | CBI | (G) Industrial Surfactant | (S) D-Glucopyranose, oligomeric, maleates, C10-16-alkyl glycosides, sulfonated, potassium salts. |
P-22-0130A | 6 | 08/23/2024 | Integrity Bio-Chemical, LLC | (S) Surfactants—as raw materials for use in the manufacture of industrial products and consumer and household products; Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial); Emulsifier, Surface reduction Household and industrial detergents; Emulsifier, Wetting agent Personal care, Cosmetic, and Pet Care Grooming Products; Wetting agent—Agriculture | (S) Maltodextrin, octanoate. |
P-22-0131A | 6 | 08/23/2024 | Integrity Bio-Chemical, LLC | (S) Surfactants—as raw materials for use in the manufacture of industrial products and consumer and household products; Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial); Emulsifier, Surface reduction Household and industrial detergents; Emulsifier, Wetting agent Personal care, Cosmetic, and Pet Care Grooming Products; Wetting agent—Agriculture | (S) Maltodextrin, hexadecanoate. |
P-22-0132A | 6 | 08/23/2024 | Integrity Bio-Chemical, LLC | (S) Surfactants—as raw materials for use in the manufacture of industrial products and consumer and household products; Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial); Emulsifier, Surface reduction Household and industrial detergents; Emulsifier, Wetting agent Personal care, Cosmetic, and Pet Care Grooming Products; Wetting agent—Agriculture | (S) Maltodextrin, decanoate. |
P-22-0133A | 6 | 08/23/2024 | Integrity Bio-Chemical, LLC | (S) Surfactants—as raw materials for use in the manufacture of industrial products and consumer and household products; Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial); Emulsifier, Surface reduction Household and industrial detergents; Emulsifier, Wetting agent Personal care, Cosmetic, and Pet Care Grooming Products; Wetting agent—Agriculture | (S) Maltodextrin, octadecanoate. |
P-22-0134A | 6 | 08/23/2024 | Integrity Bio-Chemical, LLC | (S) Surfactants—as raw materials for use in the manufacture of industrial products and consumer and household products; Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial); Emulsifier, Surface reduction Household and industrial detergents; Emulsifier, Wetting agent Personal care, Cosmetic, and Pet Care Grooming Products; Wetting agent—Agriculture | (S) Maltodextrin, dodecanoate. |
P-22-0135A | 6 | 08/23/2024 | Integrity Bio-Chemical, LLC | (S) Surfactants—as raw materials for use in the manufacture of industrial products and consumer and household products; Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial); Emulsifier, Surface reduction Household and industrial detergents; Emulsifier, Wetting agent Personal care, Cosmetic, and Pet Care Grooming Products; Wetting agent—Agriculture | (S) Maltodextrin, tetradecanoate. |
P-23-0127A | 3 | 08/21/2024 | CBI | (S) Ingredient in laundry detergent that is used for degradation of stains on fabric | (G) Polysaccharide Lyase. |
P-23-0154A | 6 | 08/14/2024 | RWDC Industries | (G) The primary application areas for PHA are for food packaging and other uses where its biodegradable properties provide nontraditional end-of-use options | (G) Vegetable oils, genetically modified Cupriavidus-fermented, polyhydroxyalkanoate copolymer. |
P-24-0027A | 7 | 07/30/2024 | Mikros Biochem | (S) Surfactant for cleaners | (S) Fatty acids, C8-14, 2,3-diesters with rel-(2R, 3S)-2,3,4-trihydroxybutyl Beta-D-mannopyranoside acetate. |
P-24-0027A | 8 | 08/15/2024 | Mikros Biochem | (S) Surfactant | (S) Fatty acids, C8-14, 2,3-diesters with rel-(2R, 3S)-2,3,4-trihydroxybutyl Beta-D-mannopyranoside acetate. |
P-24-0080A | 3 | 08/27/2024 | Seppic | (S) Nonionic surfactant for industrial uses and bio manufacturing process; HI&I, Plant protection products; Firefighting foam; Detergents; Oilfield; Paper and textile | (S) D-Glucopyranose, oligomeric, C9-11-branched alkyl glycosides. |
P-24-0134A | 3 | 08/13/2024 | Chevron Phillips Chemical Company, LP | (G) Chemical intermediate | (G) Metal oxalate. |
P-24-0162A | 4 | 08/05/2024 | Proton Power, Inc | (S) Increases strength of epoxy, plastics, moulding compounds, strength, modulus, tear resistance for polyurethane foam. Improves the rutting behavior of asphalt, the capacity and thermal and electrical conductivity for batteries, strength of body armor and helmets, drying time and antifouling for paints | (S) single and multilayer turbostratic graphene. |
P-24-0179 | 1 | 07/18/2024 | CBI | (G) Component in batteries | (G) Aluminum- and metal-doped cobalt metal nickel oxide. |
P-24-0180 | 1 | 07/18/2024 | CBI | (G) Component in batteries | (G) Aluminum- and metal- and metal-doped cobalt metal nickel oxide. |
P-24-0181 | 1 | 07/18/2024 | CBI | (G) Component in batteries | (G) Metal- and metal-doped cobalt metal nickel oxide. |
P-24-0182 | 1 | 07/18/2024 | CBI | (G) Chemical precursor | (G) Cobalt metal nickel compound. |
P-24-0184 | 1 | 07/30/2024 | Bedoukian Research, Inc | (S) Site limited chemical intermediate | (G) Phosphonic acid, P-(cyanomethyl)-, dialkyl ester. |
P-24-0186 | 1 | 08/07/2024 | SGP Ventures, Inc | (S) Epoxy used to fill holes in printed circuit boards | (S) 2-Methyl-4-(oxiran-2-ylmethoxy)-N,N-bis(oxiran-2-ylmethyl)aniline. |
P-24-0186A | 2 | 08/14/2024 | SGP Ventures, Inc | (S) Epoxy used to fill holes in printed circuit boards | (S) 2-Oxiranemethanamine, N-[2-methyl-4-(2-oxiranylmethoxy)phenyl]-N-(2-oxiranylmethyl)-. |
P-24-0187 | 1 | 08/09/2024 | NSG Glass North America, Inc | (G) Chemical Intermediate | (G) Alkyl transition metal alkoxide. |
P-24-0188 | 1 | 08/09/2024 | CBI | (G) Component in batteries | (G) Cobalt metal nickel zirconium doped. |
P-24-0189 | 1 | 08/16/2024 | CBI | (G) Contained use for microlithography for electronic device manufacturing | (G) Silsesquioxanes, alkyl Ph alkoxy(halosubstitutedphenyl), polymers with silicic acid (H4SiO4) tetra-Me ester, hydroxy-terminated. |
P-24-0190A | 2 | 08/27/2024 | CBI | (G) Photoacid generator use at customer sites | (G) Aromatic sulfonium tricyclo salt with alkyl carbomonocycle hetero acid. |
P-24-0191 | 1 | 08/23/2024 | Top World Intl, Inc | (G) Conductive agent | (S) Carbon nanotube, multi-walled in tubular shape. |
Table II—NOCs Approved * From 8/01/2024 to 8/31/2024
Case No. | Received date | Commencement date | If amendment, type of amendment | Chemical substance |
---|---|---|---|---|
P-18-0360 | 08/08/2024 | 07/15/2024 | N | (S) oxirane, 2-methyl-, polymer with 2,4-diisocyanato-1-methylbenzene, 2-methyloxiranepolymer with oxirane ether with 1,2,3-propanetriol (3:1), and oxirane, cashew nutshell liq.- and Pr alc. -blocked. |
P-18-0360A | 08/14/2024 | 07/15/2024 | Updated company name | (S) oxirane, 2-methyl-, polymer with 2,4-diisocyanato-1-methylbenzene, 2-methyloxiranepolymer with oxirane ether with 1,2,3-propanetriol (3:1), and oxirane, cashew nutshell liq.- and Pr alc. -blocked. |
P-20-0172A | 08/08/2024 | 04/12/2022 | Updated generic chemical name | (G) Poly[oxyalkylenediyl)], a,a′,a″-1,2,3-propanetriyltris[w-[[-1-oxo-alkene-1-yl]oxy]-. |
P-21-0055 | 08/13/2024 | 07/08/2022 | N | (G) Fatty acids, reaction products with polyamine-polyacid polymer and fatty acid. |
P-22-0007 | 08/13/2024 | 08/05/2024 | N | (G) 3,5,8-Trioxa-4-silaalkanoic acid, 4-ethenyl-4-(2-alkoxy-1-alkyl-2-oxoethoxy)-2,6-dialkyl-7-oxo-, alkyl ester. |
P-22-0011 | 08/23/2024 | 08/22/2024 | N | (G) Alkadiene, homopolymer, hydroxy-terminated, bis[N-[2-[(1-oxo-2-propen-1-yl)oxylethyl]carbamates]. |
P-22-0121 | 08/26/2024 | 08/15/2024 | N | (S) 1,1,3,3-Tetrachloroprop-1-ene. |
P-22-0157A | 08/08/2024 | 05/28/2024 | Updated chemical name | (S) 1,2-Ethanediamine, N1,N2-dimethyl-N1-(1-methylethyl)-N2-[2-[methyl(1-methylethyl)amino]ethyl]. |
Table III—Test Information Received From 8/01/2024 to 8/31/2024
Case No. | Received date | Type of test information | Chemical substance |
---|---|---|---|
L-24-0004 | 08/14/2024 | Monitoring Report | (G) 3-Alkene, 1-chloro-, (3Z)-. |
P-21-0180 | 08/01/2024 | Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107) | (G) Sulfonium, (halocarbomonocycle)diphenyl-, salt with 1-heterosubstituted-2-methylalkyl trihalobenzoate (1:1). |
P-21-0202 | 08/08/2024 | Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107) | (G) Sulfonium, carbomonocycle bis[(trihaloalkyl)carbomonocycle], substituted carbomonocyclic ester. |
P-22-0042 | 08/27/2024 | Genetic Toxicology Study Results | (G) Alkanedione, [[[(substituted)aryl]thio]aryl]-, 2-(O-acetyloxime). |
P-22-0086 | 08/01/2024 | Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107) | (G) Phenoxathiinium, 10-phenyl-, 5-alkyl-2-alkyl-4-(2,4,6-substituted tri- carbopolycycle, hetero-acid)benzenesulfonate (1:1). |
P-22-0122 | 08/01/2024 | Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107) | (G) Heterotrisubstituted-bile acid, 1-(difluorosulfomethyl)-2,2,2-trifluoroethyl ester, ion(1-), (5)-, 5-phenyldibenzothiophenium(1:1). |
P-22-0179 | 08/01/2024 | Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107) | (G) Sulfonium, (alkylsubstitutedphenyl)diphenyl-, salt with 1-(heterosubstitutedalkyl)-2,2,2-triheterosubstitutedalkyl trisubstitutedbenzoate (1:1). |
P-22-0180 | 08/01/2024 | Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107) | (G) Dibenzothiophenium, 5-phenyl-, 4-[1-(heterosubstitutedalkyl)-2,2,2-triheterosubstitutedalkoxy]-4-oxoalkyl trisubstitutedbenzoate (1:1). |
P-23-0049 | 08/16/2024 | Partition Coefficient (n-octanol/water), Estimation by High Performance Liquid Chromatography (HPLC) (OECD Test Guideline 117) (Final Report) | (G) Sulfonium, tricarbocyclic-, 2-aryl- polyfluoropolyhydro-alkano -heteropolycycle-alkanesulfonate (1:1), polymer with heteroatom substituted aryl and carbomonocyclic 2-alkyl-2-alkanoate, di-Me 2,2-(1,2-diazenediyl)bis[2-methylpropanoate]-initiated. |
P-23-0104 | 08/08/2024 | Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107) | (G) Sulfonium, carbomonocycle bis[(trihaloalkyl)carbomonocycle], disubstituted carbomonocyclic ester. |
P-24-0097 | 08/01/2024 | Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107) | (G) Sulfonium, tris(4-fluorophenyl)-, (substitutedphenoxy)alkyl substitutedbenzoate (1:1). |