Certain Corrosion-Resistant Carbon Steel Flat Products and Cut-to-Length Carbon Steel Plate Products from Germany: Final Results of Countervailing Duty Changed Circumstances Reviews and Revocation of the Orders, in Whole

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

ACTION:

Notice of final results of countervailing duty changed circumstances reviews and revocation of the orders, in whole.

SUMMARY:

On January 28, 2004, the Department of Commerce (the Department) published a notice of preliminary results of changed circumstances reviews of the countervailing duty orders on certain corrosion-resistant carbon steel flat products and cut-to-length carbon steel plate products from Germany. See Certain Corrosion-Resistant Carbon Steel Flat Products and Cut-to-Length Carbon Steel Plate Products from Germany: Preliminary Results of Countervailing Duty Changed Circumstances Reviews, 69 FR 4114 (January 28, 2004) (Preliminary Results). In the Preliminary Results, we invited interested parties to comment on the Department's preliminary intent to revoke in whole the countervailing duty orders. We did not receive any comments. As a result, we conclude that producers accounting for substantially all of the production of the domestic like products to which these orders pertain lack interest in the relief provided by the orders. Therefore, we revoke these orders, in whole, with respect to products entered, or withdrawn from warehouse, for consumption on or after April 1, 2004.

EFFECTIVE DATE:

(April 1, 2004.)

FOR FURTHER INFORMATION CONTACT:

Robert Copyak, Office of AD/CVD Enforcement VI, Group II, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone (202) 482-2209.

SUPPLEMENTARY INFORMATION:

Background

On August 17, 1993, the Department published countervailing duty orders on certain corrosion-resistant carbon steel flat products and cut-to-length carbon steel plate products from Germany. See Countervailing Duty Orders and Amendment to Final Affirmative Countervailing Duty Determinations: Certain Steel Products From Germany, 58 FR 43756 (August 17, 1993). On October 22, 2003, International Steel Group, Inc. (purchaser of Bethlehem Steel Corporation) and United States Steel Corporation, requested that the Department revoke the countervailing duty orders, effective April 1, 2004, based on their lack of further interest in these proceedings. In response to this request, on December 3, 2003, the Department published a notice of initiation of changed circumstances reviews of the countervailing duty orders on certain corrosion-resistant carbon steel flat products and cut-to-length carbon steel plate products from Germany. See Certain Corrosion-Resistant Carbon Steel Flat Products and Cut-to-Length Carbon Steel Plate Products from Germany: Initiation of Countervailing Duty Changed Circumstances Reviews, 68 FR 67657 (December 3, 2003) (Initiation Notice)

On January 28, 2004, the Department published a notice of preliminary results of changed circumstances reviews of the countervailing duty orders on certain corrosion-resistant carbon steel flat products and cut-to-length carbon steel plate products from Germany. See Preliminary Results. We did not receive any comments on our preliminary results.

Scope of the Orders

The products covered by these reviews are certain corrosion-resistant carbon steel flat products and cut-to-length steel plate products from Germany.

(1) Certain corrosion-resistant carbon steel flat products: The scope of countervailing duty order on certain corrosion-resistant carbon steel flat products (corrosion-resistant) includes flat-rolled carbon steel products, of rectangular shape, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based alloys, whether or not corrugated or painted, varnished or coated with plastics or other nonmetallic substances in addition to the metallic coating, in coils (whether or not in successively superimposed layers) and of a width of 0.5 inch or greater, or in straight lengths which, if of a thickness less than 4.75 millimeters, are of a width of 0.5 inch or greater and which measures at least 10 times the thickness or if of a thickness of 4.75 millimeters or more are of a width which exceeds 150 millimeters and measures at least twice the thickness, as currently classifiable in the Harmonized Tariff Schedule (HTS) under item numbers 7210.31.0000, 7210.39.0000, 7210.41.0000, 7210.49.0030, 7210.49.0090, 7210.60.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.1000, 7210.90.6000, 7210.90.9000, 7212.21.0000, 7212.29.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7212.60.0000, 7215.90.1000, 7215.90.5000, 7217.12.1000, 7217.13.1000, 7217.19.1000, 7217.19.5000, 7217.22.5000, 7217.23.5000, 7217.29.1000, 7217.29.5000, 7217.32.5000, 7217.33.5000, 7217.39.1000, and 7217.39.5000. Included in this scope are flat-rolled products of non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been worked after rolling)—for example, products which have been beveled or rounded at the edges. Excluded from this scope are flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead (terne plate), or both chromium and chromium oxides (tin-free steel), whether or not painted, varnished or coated with plastics or other nonmetallic substances in addition to the metallic coating. Also excluded from this scope are clad products in straight lengths of 0.1875 inch or more in composite thickness and of a width which exceeds 150 millimeters and measures at least twice the thickness. Also excluded from this scope are certain clad stainless flat-rolled products, which are three-layered corrosion-resistant carbon steel flat-rolled products less than 4.75 millimeters in composite thickness that consist of a carbon steel flat-rolled product clad on both sides with stainless steel in a “20 percent—60 percent—20 percent” ratio. On September 22, 1999, the Department issued the final results of a changed circumstances review and revoked the order with respect to certain corrosion-resistant steel. See Notice of Final Results of Changed Circumstances Antidumping Duty and Countervailing Duty Reviews and Revocation of Orders in Part: Certain Corrosion-Resistant Carbon Steel Flat Products From Germany, 64 FR 51292 (September 22, 1999). The Department noted that the affirmative statement of no interest by petitioners, combined with the lack of comments from interested parties, is sufficient to warrant partial revocation. This partial revocation applies to certain corrosion-resistant deep-drawing carbon steel strip, roll-clad on both sides with aluminum (AlSi) foils in accordance with St3 LG as to EN 10139/10140. The merchandise's chemical composition encompasses a core material of U St 23 (continuous casting) in which carbon is less than 0.08 percent; manganese is less than 0.30 percent; phosphorous is less than 0.20 percent; sulfur is less than 0.015 percent; aluminum is less than 0.01 percent; and the cladding material is a minimum of 99 percent aluminum with silicon/copper/iron of less than 1 percent. The products are in strips with thicknesses of 0.07mm to 4.0mm (inclusive) and widths of 5mm to 800mm (inclusive). The thickness ratio of aluminum on either side of steel may range from 3 percent/94 percent/3 percent to 10 percent/80 percent/10 percent.

(2) Certain cut-to-length carbon steel plate products: The scope of countervailing duty order on certain cut-to-length carbon steel plate products (cut-to-length steel) includes hot-rolled carbon steel universal mill plates (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 millimeters but not exceeding 1,250 millimeters and of a thickness of not less than 4 millimeters, not in coils and without patterns in relief), of rectangular shape, neither clad, plated nor coated with metal, whether or not painted, varnished, or coated with plastics or other nonmetallic substances; and certain hot-rolled carbon steel flat-rolled products in straight lengths, of rectangular shape, hot rolled, neither clad, plated, nor coated with metal, whether or not painted, varnished, or coated with plastics or other nonmetallic substances, 4.75 millimeters or more in thickness and of a width which exceeds 150 millimeters and measures at least twice the thickness, as currently classifiable in the Harmonized Tariff Schedule (HTS) under item numbers 7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000, and 7212.50.0000. Included are flat-rolled products of non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been worked after rolling) for example, products which have been beveled or rounded at the edges. Excluded is grade X-70 plate. On August 25, 1999, the Department issued the final results of a changed-circumstances review revoking the order in part, with respect to certain carbon cut-to-length steel plate with a maximum thickness of 80 mm in steel grades BS 7191, 355 EM and 355 EMZ, as amended by Sable Offshore Energy Project Specification XB MOO Y 15 0001, types 1 and 2. See Certain Cut-to-Length Carbon Steel Plate from Finland, Germany, and United Kingdom: Final Results of Changed Circumstances Antidumping Duty and Countervailing Duty Reviews, and Revocation of Orders in Part, 64 FR 46343 (August 25, 1999).

The HTS item numbers are provided for convenience and customs purposes. The written description remains dispositive.

Final Results of Reviews and Revocation of the Countervailing Duty Orders, in Whole

Pursuant to section 751(d)(1) of the 1930 Tariff Act, as amended (the Act), and § 351.222(g) of the regulations, the Department may revoke an antidumping or countervailing duty order, in whole or in part, based on a review conducted under section 751(b) of the Act (i.e., a changed circumstances review). Section 751(b)(1) of the Act requires a changed circumstances review to be conducted upon receipt of a request which shows changed circumstances sufficient to warrant a review. Section 782(h)(2) of the Act gives the Department the authority to revoke an order if producers accounting for substantially all of the production of the domestic like product have expressed a lack of interest in the continuation of the order. Section 351.222(g) of the Department's regulations provides that the Department will conduct a changed circumstances review under § 351.216 of the Department's regulations, and may revoke an order (in whole or in part), if it concludes that (i) producers accounting for substantially all of the production of the domestic like product to which the order pertains have expressed a lack of interest in the relief provided by the order, in whole or in part, or (ii) if other changed circumstances sufficient to warrant revocation exist. The Department has interpreted “substantially all” production normally to mean at least 85 percent of the domestic production of the like product. See Certain Tin Mill Products From Japan: Final Results of Changed Circumstances Review, 66 FR 52109 (October 12, 2001); see also, 19 CFR 351.208(c).

As noted above, in the Initiation Notice and in the Preliminary Results, the petitioners requested the revocation of these orders because they are no longer interested in maintaining the orders or in the imposition of duties on the subject merchandise as of April 1, 2004. Because the Department did not receive objections to the request for revocation of these orders from domestic producers accounting for more than 15 percent of production of the domestic like product and did not receive any comments on our Preliminary Results, we conclude that producers accounting for substantially all of the production of the domestic like products to which these orders pertain lack interest in the relief provided by the orders.

In accordance with 19 CFR 351.222(g), the Department determines that there is a reasonable basis to believe that changed circumstances exist sufficient to warrant revocation of the orders. Therefore, the Department is revoking the orders on certain corrosion-resistant carbon steel flat products and cut-to-length carbon steel plate products from Germany, in whole.

As a result of these reviews, we will instruct the U.S. Customs and Border Protection to terminate suspension of liquidation effective April 1, 2004.

This notice is published in accordance with section 751(b)(1) of the Act and §§ 351.216 and 351.222 of the Department's regulations.