Airworthiness Directives; Bombardier, Inc., Airplanes

Download PDF
Federal RegisterJul 12, 2024
89 Fed. Reg. 57073 (Jul. 12, 2024)

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule.

SUMMARY:

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by a report of sparking due to damaged wire insulation in the fueling adapter. This AD requires inspecting the electrical wires attached to the airplane connector located behind the fuel scupper for damage, and all applicable related investigative and corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.

DATES:

This AD is effective August 16, 2024.

The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of August 16, 2024.

ADDRESSES:

AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-0467; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

Material Incorporated by Reference:

  • For service information, contact Bombardier Business Aircraft Customer Response Center, 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; phone 514-855-2999; emailac.yul@aero.bombardier.com; website bombardier.com.
  • You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2024-0467.

FOR FURTHER INFORMATION CONTACT:

Steven Dzierzynski, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516-228-7300; email: 9-avs-nyaco-cos@faa.gov.

SUPPLEMENTARY INFORMATION:

Background

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. The NPRM published in the Federal Register on March 21, 2024 (89 FR 20141). The NPRM was prompted by AD CF-2023-55, dated July 18, 2023, issued by Transport Canada, which is the aviation authority for Canada (referred to after this as the MCAI). The MCAI states that during airplane refueling, a spark was seen when the fuel cap chain contacted one of the fuel scupper bolts. An inspection was performed and one of the fourteen bolts that surround the fuel inlet was found touching an electrical wire behind the scupper. Due to vibrations during flight, the bolt damaged the wire insulation and when the bolt was grounded to the airframe a spark was generated.

In the NPRM, the FAA proposed to require inspecting the electrical wires attached to the airplane connector located behind the fuel scupper for damage, and all applicable related investigative and corrective actions. The FAA is issuing this AD to address damaged wire insulation, which could lead to electrical sparks during refueling and possibly result in a fire.

You may examine the MCAI in the AD docket at regulations.gov under Docket No. FAA-2024-0467.

Discussion of Final Airworthiness Directive

Comments

The FAA received no comments on the NPRM or on the determination of the cost to the public.

Conclusion

This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on this product. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.

Related Service Information Under 1 CFR Part 51

The FAA reviewed Bombardier Service Bulletin 605-28-014, dated May 10, 2023; and Bombardier Service Bulletin 650-28-003, dated May 10, 2023. This service information specifies procedures for inspecting the electrical wires attached to the J274 connector ( i.e., the airplane connector located behind the fuel scupper) for damage ( i.e., core of the electrical wire exposed, or damage such as black soot to the insulation with no core exposure), and applicable related investigative and corrective actions. The related investigative action includes inspecting the fuel scupper for damage ( i.e., arcing or pitting marks directly or indirectly induced by the wire chaffed on the scupper bolt and the surrounding area). The corrective actions include repairing any damaged fuel scupper, repairing or replacing any damaged electrical wire, and reinstalling the fuel scupper without a certain attachment bolt. These documents are distinct since they apply to different configurations of the airplane.

This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

The FAA estimates that this AD affects 163 airplanes of U.S. registry.

The FAA estimates the following costs to comply with this AD:

Estimated Costs for Required Actions

Labor cost Parts cost Cost per product Cost on U.S. operators
3 work-hours × $85 per hour = $255 $0 $255 $41,565

The FAA estimates the following costs to do any necessary on-condition actions that would be required based on the results of any required actions. The FAA has no way of determining the number of aircraft that might need these on-condition actions:

Estimated Costs of On-Condition Actions

Labor cost Parts cost Cost per product
4 work-hours × $85 per hour = $340 * ** $0 $340
* The FAA has received no definitive data on which to base the cost estimates for the on-condition scupper repair specified in this AD.
** The FAA has received no definitive data on which to base the parts cost for the electrical wire replacement specified in this AD.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

  • Air transportation
  • Aircraft
  • Aviation safety
  • Incorporation by reference
  • Safety

The Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13
[Amended]

2. The FAA amends § 39.13 by adding the following new airworthiness directive:

2024-13-01 Bombardier, Inc.: Amendment 39-22775; Docket No. FAA-2024-0467; Project Identifier MCAI-2023-00892-T.

(a) Effective Date

This airworthiness directive (AD) is effective August 16, 2024.

(b) Affected ADs

None.

(c) Applicability

This AD applies to Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes, certificated in any category, serial numbers 5775 through 5990 inclusive and 6050 through 6178 inclusive.

(d) Subject

Air Transport Association (ATA) of America Code 28, Fuel.

(e) Unsafe Condition

This AD was prompted by a report of sparking due to damaged wire insulation in the fueling adapter. The FAA is issuing this AD to address damaged wire insulation. The unsafe condition, if not addressed, could lead to electrical sparks during refueling and possibly result in a fire.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Inspections

Within 48 months after the effective date of this AD: Inspect the electrical wires attached to the J274 connector for damage, in accordance with Section 2.B of the Accomplishment Instructions of the applicable Bombardier service bulletin referenced in figure 1 to paragraph (g) of this AD.

Figure 1 to Paragraph ( g )—Applicable Service Bulletins

Model Serial No. Service bulletin
CL-600-2B16 5775 through 5990 inclusive Bombardier Service Bulletin 605-28-014, dated May 10, 2023.
CL-600-2B16 6050 through 6178 inclusive Bombardier Service Bulletin 650-28-003, dated May 10, 2023.

(h) Related Investigative and Corrective Actions

Before further flight after accomplishing paragraph (g) of this AD, do the applicable actions specified in paragraph (h)(1) or (2) of this AD.

(1) If no electrical wire is damaged, do the related investigative and corrective actions specified in and in accordance with Section 2.C of the Accomplishment Instructions of the applicable Bombardier service bulletin referenced in figure 1 to paragraph (g) of this AD.

(2) If any electrical wire is damaged, do the related investigative and corrective actions specified in and in accordance with Section 2.D of the Accomplishment Instructions of the applicable Bombardier service bulletin referenced in figure 1 to paragraph (g) of this AD.

(i) Additional AD Provisions

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the International Validation Branch, mail it to the address identified in paragraph (j) of this AD. Information may be emailed to: 9-AVS-NYACO-COS@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or Transport Canada; or Bombardier, Inc.'s Transport Canada Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature.

(j) Additional Information

For more information about this AD, contact Steven Dzierzynski, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516-228-7300; email: 9-avs-nyaco-cos@faa.gov.

(k) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(i) Bombardier Service Bulletin 605-28-014, dated May 10, 2023.

(ii) Bombardier Service Bulletin 650-28-003, dated May 10, 2023.

(3) For service information, contact Bombardier Business Aircraft Customer Response Center, 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; phone 514-855-2999; email ac.yul@aero.bombardier.com; website bombardier.com.

(4) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

(5) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locationsoremailfr.inspection@nara.gov.

Issued on June 18, 2024.

James D. Foltz,

Deputy Director, Compliance & Airworthiness Division, Aircraft Certification Service.

[FR Doc. 2024-15306 Filed 7-11-24; 8:45 am]

BILLING CODE 4910-13-P