Section 130.47 - Construction Management II (Two Credits)(a) General requirements. This course is recommended for students in Grades 11 and 12. Prerequisite: Construction Management I. Students shall be awarded two credits for successful completion of this course.(b) Introduction. (1) Career and technical education instruction provides content aligned with challenging academic standards and relevant technical knowledge and skills for students to further their education and succeed in current or emerging professions.(2) The Architecture and Construction Career Cluster focuses on designing, planning, managing, building, and maintaining the built environment.(3) In Construction Management II, students will gain knowledge and skills needed to enter the workforce as apprentice carpenters or building maintenance supervisors' assistants or to build a foundation toward a postsecondary degree in architecture, construction science, drafting, or engineering. Construction Management II includes knowledge of the design, techniques, and tools related to the management of architectural and engineering projects.(4) Students are encouraged to participate in extended learning experiences such as career and technical student organizations and other leadership or extracurricular organizations.(5) Statements that contain the word "including" reference content that must be mastered, while those containing the phrase "such as" are intended as possible illustrative examples.(c) Knowledge and skills. (1) The student demonstrates professional standards/employability skills as required by business and industry. The student is expected to: (A) apply construction technology to individual or local problems;(B) identify the appropriate resources needed to solve problems; and(C) describe the factors that affect the purchase and use of buildings.(2) The student designs or modifies a structure using designated design processes and techniques. The student is expected to:(A) develop or improve a building design that meets a specified need; and(B) develop and communicate ideas using specified design processes.(3) The student investigates emerging construction technologies. The student is expected to: (A) report on emerging construction technologies; and(B) conduct research in construction technology to determine its effectiveness.(4) The student describes quality and how it is measured in construction. The student is expected to: (A) construct items that meet a specified level of quality;(B) recommend how the quality of a building can be improved; and(C) explain the factors that affect the quality of buildings.(5) The student constructs buildings or scaled models using the appropriate tools, equipment, machines, materials, and technical processes. The student is expected to: (A) describe the chemical, mechanical, and physical properties and standard units of measure of architectural construction materials such as concrete, masonry, and metals;(B) describe the processes used in construction; and(C) construct a building or a model of a building using a variety of tools, equipment, and machines.(6) The student works safely with construction technology. The student is expected to: (A) master relevant safety tests;(B) follow safety manuals, instructions, and requirements;(C) identify and classify hazardous materials and wastes correctly;(D) dispose of hazardous materials and waste appropriately; and(E) recommend improvements in safety procedures.(7) The student performs basic maintenance on selected construction equipment and machines. The student is expected to: (A) maintain tools and materials correctly;(B) perform manufacturers' maintenance procedures on selected tools, equipment, and machines; and(C) develop a maintenance plan for selected machines and equipment.(8) The student manages construction technology projects. The student is expected to: (A) initiate a construction technology project;(B) plan a construction technology project, including developing a project schedule and describing use of resources needed;(C) execute a construction technology project;(D) monitor and control a construction technology project; and(E) close a construction technology project.(9) The student follows the appropriate codes, laws, standards, or regulations related to architectural construction technology. The student is expected to:(A) identify areas where codes, laws, standards, or regulations may be required;(B) locate the appropriate codes, laws, standards, or regulations; and(C) comply with the appropriate codes, laws, standards, or regulations.(10) The student solves problems, thinks critically, and makes decisions related to architectural construction. The student is expected to: (A) develop or improve a building or structure by following a problem-solving strategy;(B) apply critical-thinking strategies to the analysis and evaluation of proposed technological solutions; and(C) apply decision-making techniques to the selection of technological solutions.(11) The student determines the cost of constructing a building. The student is expected to: (A) develop a budget for a construction project; and(B) determine the most effective strategies to minimize costs.(12) The student applies communication, mathematical, and scientific knowledge and skills to construction activities. The student is expected to: (A) write technical reports;(B) make technical presentations to groups of individuals;(C) use mathematical concepts in construction technology; and(D) apply scientific principles used in construction technology.(13) The student describes the importance of teamwork, leadership, integrity, honesty, work habits, and organizational skills. The student is expected to: (A) describe how teams function;(B) use teamwork to solve problems;(C) distinguish between the roles of team leaders and team members;(D) identify characteristics of good leaders;(E) identify employers' expectations for appropriate work habits;(F) define discrimination, harassment, and inequality;(G) use time-management techniques to develop work schedules, maintain work schedules, and meet work schedule deadlines; and(H) complete work according to established criteria.(14) The student gains knowledge about the ingredients of concrete, various types of concrete, and methods to mix concrete. The student is expected to: (A) identify the properties of cement;(B) describe the composition of concrete;(C) perform volume estimates for concrete quantity requirements;(D) describe types of concrete reinforcement materials;(E) describe various types of footings and explain their uses;(F) identify the parts of various types of forms;(G) explain the safety procedures associated with the construction of concrete forms; and(H) explain how to erect, plumb, and brace a simple concrete form with reinforcement.(15) The student uses a systems approach to investigate mechanical, fluid, electrical, and thermal systems. The student is expected to: (A) apply the universal systems model to technological activities; and(B) identify the inputs, processes, outputs, and feedback associated with each of the systems.(16) The student works safely with mechanical, fluid, electrical, and thermal technology. The student is expected to:(A) master relevant safety tests;(B) follow safety manuals, instructions, and requirements;(C) identify and classify hazardous materials and wastes; and(D) dispose of hazardous materials and wastes appropriately.(17) The student solves problems, thinks critically, and makes decisions related to construction. The student is expected to:(A) apply problem-solving strategies;(B) apply critical-thinking strategies;(C) apply decision-making techniques to the selection of technological solutions; and(D) evaluate the impact of technology on scientific thought, society, and the environment.(18) The student applies communication, science, and mathematics knowledge and skills to construction activities. The student is expected to: (A) prepare technical reports and presentations;(B) solve algebraic equations;(C) solve problems in U.S. standard and metric units; and(D) perform unit conversions.(19) The student knows the laws governing motion. The student is expected to: (A) analyze examples of uniform and accelerated motion, including linear, projectile, and circular motion;(B) evaluate the effects of forces on the motion of objects;(C) develop a free-body diagram for force analysis; and(D) analyze motion relative to different frames of reference.(20) The student knows the concept of momentum. The student is expected to: (A) identify linear and angular momentum; and(B) relate the conservation of momentum to linear and angular motion.(21) The student knows the concept of waves and vibrations. The student is expected to: (A) evaluate characteristics of wave motion; and(B) demonstrate how waves transmit energy.(22) The student knows the concept of energy conversion. The student is expected to: (A) evaluate the purpose of energy converters;(B) identify converters that change one form of energy to another; and(C) evaluate the efficiency of converting energy from one form to another.(23) The student knows the concept of energy transduction. The student is expected to: (A) identify the function of a transducer;(B) distinguish between an energy converter and a transducer; and(C) identify transducers that change energy signals from one form to another.(24) The student knows the concept of radiant energy. The student is expected to: (B) compare fission and fusion in terms of end products, energy, advantages, and availability; and(C) compare and contrast different types of radioactive decay.(25) The student knows the concept of light and optics. The student is expected to: (A) identify characteristics of optical devices;(B) analyze the characteristics of light, including reflection, refraction, and interference; and(C) interpret the effects of wave characteristics in daily applications such as lasers and optics in industrial and medical technology.(26) The student knows the concept of time constants. The student is expected to: (A) define a time constant; and(B) distinguish between a linear and non-linear increase and decrease of a variable with time.(27) The student describes basic product marketing processes and techniques used in construction. The student is expected to:(A) prepare a marketing plan for an idea, product, or service; and(B) discuss the effect of customer satisfaction on the image of a product or company.(28) The student investigates career opportunities, requirements, and expectations in construction technology. The student is expected to: (A) identify an area of interest in construction and investigate its entry-level and advancement requirements and its growth potential; and(B) describe the careers available in construction.(29) The student describes the importance of teamwork, leadership, integrity, honesty, work habits, and organizational skills. The student is expected to: (A) describe how teams function;(B) use teamwork to solve problems;(C) distinguish between the roles of team leaders and team members;(D) identify characteristics of good leaders;(E) identify employers' expectations and appropriate work habits;(F) define discrimination, harassment, and inequality;(G) use time-management techniques to develop and maintain work schedules and meet deadlines; and(H) complete work according to established criteria.19 Tex. Admin. Code § 130.47
The provisions of this §130.47 adopted to be effective August 23, 2010, 34 TexReg 5917; Repealed by Texas Register, Volume 40, Number 39, September 25, 2015, TexReg 6597, eff. 8/28/2017; Amended by Texas Register, Volume 40, Number 51, December 18, 2015, TexReg 9145, eff. 8/28/2017